HS Code search engine HTS tariff classification hs codes

Results for :"other base metal similar mountings fittings etc"

other base metal similar mountings fittings etc

Other
8302.49

Other

Universal 6-digit HS Code

8302.49

Other

Select Country of Import:

"other base metal similar mountings fittings etc" related products of sub-heading 8302.49

8302.49

other mountings fittings and similar articles

FindHS.Codes
click for details
8302.49

mountings fittings and similar articles ...

FindHS.Codes
click for details
8302.49.00.99

fittings made of base metal, for car bod...

EU-BTI
8302.49.00.99

rectangular metal products with two through-holes and a hollow cylindrical protrusion, used as a locking mechanism for a protective housing door

EU-BTI(+1 similar)
8302.49.00.99

fully made of base metals, consisting of a casing with a closure slider, which can be moved without key via a reversible lever, featuring an enclosure...

EU-BTI
8302.49.00.99

other metal fittings for vehicle bodies ...

EU-BTI
8302.49.00.99

hinge, consisting of a galvanized steel ...

EU-BTI
8302.49.00.99

hinge consisting of galvanized steel pla...

EU-BTI
8302.49.00.99

cross-shaped components made of non-ferrous metal, produced by fine casting, with rounded edges on two opposite sides and a cylindrical base, used as ...

EU-BTI(+3 similar)
8302.49.00.99

bolt for closing the back door of traile...

EU-BTI
8302.49.00.99

bolt with steel plate for closing traile...

EU-BTI
8302.49.00.99

a bolt with steel plate, used in trailer...

EU-BTI
8302.49.00.99

bolt consisting of steel plate, used in ...

EU-BTI
8302.49.00.99

a bolt with a steel plate, used for clos...

EU-BTI
8302.49.00.99

base metal handle

EU-BTI
8302.49.00.99

base metal handle

EU-BTI
8302.49.00.99

other metal fittings for vehicle bodywork, with approximately triangular outline and circular opening for bearing bush, integrated into massive plate ...

EU-BTI

All the results generated by the FindHS AI for the "other base metal similar mountings fittings etc"
Group By Sub-heading

8302.4X

other mountings, fittings and similar articles of base metals

FindHS.Codes
click for details
8302

Base metal mountings, fittings and simil...

FindHS.Codes
click for details
8302.41.6080

base metal mountings

US-Rulings
8302

mountings fittings and similar articles

FindHS.Codes
click for details
8302.41

other base metal mountings fittings and similar articles for buildings

FindHS.Codes
click for details
8302.42

other base metal mountings fittings and similar articles for furnitures

FindHS.Codes
click for details
8302.30

other base metals mountings, fittings and similar articles suitable for motor vehicles

FindHS.Codes
click for details
8302.4X

reinforced plates

FindHS.Codes
click for details
8302.4X

types of joints

FindHS.Codes
click for details
3926.90.97.90

stand foot with a base plate and two plastic inserts for holding a playstation console, consisting of a plastic base plate, two plastic inserts, and a...

EU-BTI
3926.90.97.90

Befestigungssockel made of injection-mol...

EU-BTI
8302.4X

protective nails or studs

FindHS.Codes
click for details
7616.99.90

aluminum lid, base of base metal, 465 x 193 x 3 mm, used for access to cables in air freight containers for temperature-controlled goods

EU-BTI
8302.20.00

bock housing with base metal fasteners

EU-BTI
7318.22.00

Round base plate washer, used in air fre...

EU-BTI
8302.10.00.90

long, flat products made of base metal, ...

EU-BTI
8302.50.00

Pipe support made of base metal

EU-BTI
8302.41

grip bars

FindHS.Codes
click for details
8302.30

tailboard fastening fittings

FindHS.Codes
click for details
Multiple Codes

curtain rods

FindHS.Codes
click for details
8302.4X

roller ends

FindHS.Codes
click for details
7326.90.8688

steel post base fittings

US-Rulings
7326.90.92

wrought steel structure in the form of a base, equipped with 4 panels and 4 interlocking angles, including hardware kit, used for raising a cabinet 10...

EU-BTI
8302.30.00.90

fully made of non-ferrous metal products...

EU-BTI
Multiple Codes

tubes and pipes of base metals

FindHS.Codes
click for details
Multiple Codes

other tubes and pipes of base metals

FindHS.Codes
click for details
8302.20.00.90

Castors with base metal fasteners

EU-BTI
8302.20.00

Castors with base metal fasteners

EU-BTI(+10 similar)
8302.42.00

kitchen cabinet fittings made of base metal. it consists of a rectangular cover, frame on baskets, two racks with guides and two brackets for fixing t...

EU-BTI
8308.90.00.90

clamp fasteners made of base metal

EU-BTI
8301.60.00.90

parts made of base metals from locks (for closing with key), consisting of a massive, cylindrical body with an inner threaded hole at the bottom and t...

EU-BTI
8306.10.00.00

ornamental items made of base metal, consisting of a chain with three bells, each with a clapper, approximately 73.5 cm long

EU-BTI
8302.50.00.00

standard or support of base metal aluminum designed to attach to wall or ceiling for surveillance purposes with attaching a television camera

EU-BTI
8302.50.00.00

a wall mount standard for attaching a television camera, consisting of aluminum elements including a round plate, tube, adjustable swivel, and require...

EU-BTI
8302.50.00.00

a standard or support of base metal aluminum designed to attach to the wall and hold a television camera for surveillance purposes, consisting of a wa...

EU-BTI
8302.50.00.00

a standard or support of base metal aluminum, designed to attach to the wall with a manually operated adjustable swivel base for monitoring purposes

EU-BTI
8302.50.00.00

a standard or support of base metal aluminum for attaching a television camera to the ceiling for surveillance purposes

EU-BTI
8538.90.99.99

BASE SHELL, a technically drawn and specifically shaped part made of inferior metal, approximately rectangular in shape with various recesses and hole...

EU-BTI
8302.50

base metal bracket for camera, television etc

FindHS.Codes
click for details
8538.90.99.99

a rectangular metal frame connector hous...

EU-BTI
8473.30.80

framework of base metal for attaching a ...

EU-BTI
8541.90.00

A specifically shaped base part made of non-precious metal with a thread for mounting (see illustration), recognizable for use with diodes or thyristo...

EU-BTI
8301.60.00

cylinder lock components, specifically designed for e-bike battery security, manufactured from base metal with customized recesses and perforations

EU-BTI
8301.60.00.90

parts made of non-precious metals, consisting of a cylindrical housing and a housing insert, specifically designed for use in cylindrical locks with k...

EU-BTI
7616.99.90.99

near U-shaped products made of non-ferrous metal (aluminum) with threaded holes at their ends, used as hand grips on the gear box doors of rotor spinn...

EU-BTI
8302.4X

release connectors

FindHS.Codes
click for details
7326.90.98.90

clamp stainless steel consisting of a mounting base for distribution box on a pole wood or metal, with three holes

EU-BTI
6303.92.10.00

Internal roller, also plisse curtain, - with metal (steel) fastening material; packaged in a transparent polybox for individual sale, - in dimensions:...

EU-BTI
7412.20.00

connection fitting made of brass as basi...

EU-BTI
8302.42.00.90

rack mounting kit, fittings made of base...

EU-BTI(+1 similar)
8481.90.00.90

product specifically designed according to technical drawing, made of non-precious metal, in the form of a rectangular base plate with special chamfer...

EU-BTI
7325.99.10.90

Metal casting attachment-eye, made of ho...

EU-BTI
8302.50

goods of base metal similar to coat hook...

EU-BTI
8302.41.10.00

building fittings made of base metal, fo...

EU-BTI
8302.41.90.00

Multi-piece fastening devices made of ba...

EU-BTI
7604.29.10

a spacer rod made of aluminium, used to create space between an airfreight container's wall panel and its base for corner protection

EU-BTI
3926.90.97.90

fixing bases made of injection-molded pl...

EU-BTI
8479.90.70.99

a wheel with a mounting cone made of bas...

EU-BTI
8302.30

exhaust tips

FindHS.Codes
click for details
8302.10.00.90

fully made of uned metal, produced in the fine casting process, products in the form of a rectangular base plate with through-hole fittings at both en...

EU-BTI
8308.90.3000

Silver plated celtic rondel

US-Rulings
7326.20

fence fittings of base metals

FindHS.Codes
click for details
7318.11.00

base metal panel screw

EU-BTI
8302.60.00

automatically operated door closers made of base metals, consisting of a cylindrical casing with end caps, mounting plate and cover, packaged together...

EU-BTI
7308.90.59.00

robust post bases made of hot-dip galvan...

EU-BTI
9031.90.00

fasteners in various designs, specifically shaped plates made of base metal with holes and recesses, intended for fastening photoelectric sensors

EU-BTI
7308.90.59.00

robust post bases made of hot-dip galvan...

EU-BTI
7308.90.59.00

robust post bases made of hot-dip galvan...

EU-BTI
8412.90.40

screw-type mounting element made of st...

EU-BTI
8305.90

other base metal office articles including parts

FindHS.Codes
click for details
7616.99.90

anodised aluminum rectangular frame with holes, used as a cable winding box frame for air freight containers

EU-BTI
7606.12.93

aluminum alloy sheet plate, intended for repairing airfreight container bottom plates

EU-BTI
8308.20.00.90

rivet bases made of base metal with a fl...

EU-BTI
7326.90.98.90

steel products consisting of a round base plate with holes and four arm supports, one joint, and a ceiling holder for the movable mounting of projecto...

EU-BTI
7324.90.00.90

U-shaped products made of complete steel...

EU-BTI
8207.50.50

base metal parts of interchangeable dril...

EU-BTI
8302.50.00.00

a product made of non-ferrous metal, in ...

EU-BTI
7907.00.00.90

screw bushing used for mounting furnitur...

EU-BTI
8207.50.50

base metal parts of interchangeable tool...

EU-BTI
8302.42.00

rectangular plates made of non-precious metal with four specifically arranged mounting holes for decoration on coffee tables between leg and floor pla...

EU-BTI
8302.30.00.90

semi-circular corner shower cabin, enclosed, without shower tap and without shower tray, unassembled. it consists of aluminum elements

EU-BTI
8305.90.00.00

W. Clamps made of base metal

EU-BTI
8538.90.99.99

Contact housing made of uned metal, specifically shaped fine casting part with different application-specific shapes and openings, designed for insert...

EU-BTI
8302.41

keyhole or finger plates

FindHS.Codes
click for details
8302.20.00

these are "rollers" with mountings of base metal

EU-BTI
7318.15

an assortment of fasteners, including sc...

EU-BTI
8302.41.10

Türdrückergarnituren aus unedlem Metall,...

EU-BTI
7326.90.94

U-shaped mounting bracket made of stamped galvanized steel for holding components like reflective elements, lights and wiring in motor vehicles

EU-BTI
7616.99.90

mounting plate of aluminum, intended for mounting a cable reel in an air freight container, consists of a plate (approx. 150 x 160 x 4 mm) with two lu...

EU-BTI
8302.50.00.00

Base metal hanger, made of black plastic...

EU-BTI
8302.50.00.00

base metal hanger made of black plastic ...

EU-BTI
8302.50.00.00

Base metal hanger, made of plastic (half...

EU-BTI
8302.20.00

Steering housing with base metal fastene...

EU-BTI(+4 similar)
8302.20.00.90

Steering housing with base metal fastene...

EU-BTI
7326.90.98.90

Pin base for fixing a turnbuckle lantern or rod ancrage, made of galvanized steel

EU-BTI
8708.99.97.90

mounting insert (Mounting Core) cast from aluminum alloy, used in car engine mounts to dampen engine vibrations and inertial forces

EU-BTI
8302.50

hat racks hat pegs brackets and similar fixtures of base metal

FindHS.Codes
click for details
8302.42.00

square plates made of inferior metal with ten specifically arranged mounting holes and bores, all outer corners and edges are chamfered, used for asse...

EU-BTI
7326.90.98

rectangular steel products made from fully galvanized steel, consisting of a nearly rectangular base plate with a stem reception device (not part of t...

EU-BTI
7318.11.00

panel screw made of base metal (stainles...

EU-BTI
8306.29.00.00

decorative objects made of base metal

EU-BTI
8306.29.00.00

ornamental object of base metal

EU-BTI
8302.50.00.00

clothes hooks made of inferior metals, consisting of a rod with a round cross-section and two attached end pieces made of brass, and two zinc holders....

EU-BTI
8308.90.00.90

metal fasteners with a 'clamping closure' for tightening belts, approximately rectangular frame made of uned metal, 44 mm long and 25 mm wide

EU-BTI
8301.60.00.90

items made from base metal, consisting of a specially shaped sheet metal housing with a right-angle bend at the lower end and a sloping bend towards t...

EU-BTI
8306.29.00.00

decorative metal base with a black paint...

EU-BTI
9022.90.20

aluminum plate with specific structure on the inside, smooth outside with recess for holding labels and threaded holes for assembly with housing middl...

EU-BTI
8302.50.00.00

products made of base metals, consisting...

EU-BTI
8302.50.00.00

Clothing hooks made of inferior metals, ...

EU-BTI
8302.50.00.00

rectangular towel holders made of zinc die-cast and brass, consisting of a base with two parallel rods, one end is attached to the wall mounting and t...

EU-BTI
7326.90.94.90

All-steel mounting plate

EU-BTI
7318.19.00.90

through bolt, base metal, wire shape, in...

EU-BTI
7317.00.60

terminal of the base metal, replacing BTI BTI CZ No. 07-0649-2009

EU-BTI
3926.90.99

cable tie-down mounting base

US-Rulings
8708.91.35.90

machined aluminum plate with perforation...

EU-BTI
8302.50.00.00

Fully made of base metal products, consisting of a approximately 60 cm long rod with circular cross-section (diameter: approximately 16 mm), equipped ...

EU-BTI
8302.50.00.00

fully made of non-ferrous metal products...

EU-BTI
8302.41

letter box plates

FindHS.Codes
click for details
8302.30.00

fittings of base metal for used to attac...

EU-BTI
8302.41

stair clips or rods

FindHS.Codes
click for details
8306.29.00.00

ornamental anchor-shaped products made of non-precious metal (aluminium) for decorating living spaces

EU-BTI
8302.41.90.00

curtain and drapery hanging devices made...

EU-BTI
8302.50.00.00

rectangular angle bracket for mounting to a wall, made of aluminum, designed for standard or holder of a television camera for surveillance purposes

EU-BTI
9305.20.00

scoped sights, made of inferior metal, w...

EU-BTI
7318.19.00.90

threaded article, cylindrical bushing of...

EU-BTI
7318.19.00

threaded article in the form of a cylindrical bushing, base metal, galvanized steel, external metric thread M16, used to strengthen assembly of coolin...

EU-BTI
8308.90.00.90

products consisting of a clamping housin...

EU-BTI(+1 similar)
9505.10.90.00

a Christmas decoration hanger made of inferior metal, approximately 31 cm long, consisting of a coloured steel plate Santa Claus head with a chain wit...

EU-BTI
8483.10.95.90

drive shaft made of non-precious metal: in the form of a rod-shaped product with precisely fitted, partly step-like cross-sectional reductions, used t...

EU-BTI
3926.90.97

base plate made of a plastic

EU-BTI
8302.50.00.00

hook of base metals

EU-BTI
8302.42.00

furniture fittings, made of general metal, for opening and closing the bed, including possible equipment with a spring or a piston rod

EU-BTI
7616.99.90.99

aluminum clamps with a cylindrical body,...

EU-BTI
7616.99.90.99

aluminum clamps with a cylindrical body ...

EU-BTI
7326.90.98.90

Metal clamp nut galvanized steel for fastening or fixing pipes to walls, ceilings, etc. It consists of two semicircles connected by means of steel scr...

EU-BTI
9013.90

a metal tube with a threaded coupling pi...

EU-BTI
7326.90.98.90

metal bracket consisting of two semicircles of galvanized steel or dichromate, for clamping or fixing pipes to walls, ceilings etc. with threaded anch...

EU-BTI
7326.90.98.90

Metal bracket consisting of two semicircle steel parts joined by screws, used for clamping or fixing pipes with threaded anchoring systems

EU-BTI
7326.20.00

Ring clamp made of base metal, used to attach nets or branches in the garden with a pair of pliers

EU-BTI
7326.90.98.90

steel housing with a rectangular base

EU-BTI
8302.50.00.00

products consisting of a rectangular mounting device made of zinc die-casting, where a rod with a round cross-section made of brass is inserted into a...

EU-BTI
8306.29.00.00

ornaments of base metal

EU-BTI
8207.80.11

base metal parts of interchangeable tool...

EU-BTI
8302.41.10.00

products made from base metal, consisting of a nearly U-shaped body with a bolt without thread at one end, perforated on both sides and equipped with ...

EU-BTI
7326.90.98.90

BRACKET BASEB MADE OF STAINLESS STEEL

EU-BTI
8302.30.00.90

metal car accessories, fully made of non-precious metal with nearly square base plate, equipped with specific holes and a circular recess in the middl...

EU-BTI
3926.90.97

a plastic article, specifically a base for enclosures, with a flat adhesive bottom and three-dimensionally worked squares on top, used as an elastic b...

EU-BTI
8302.30

base metal ashtrays for motor vehicles

FindHS.Codes
click for details
8302.42.00.90

fittings made of base metals, for furnit...

EU-BTI
8302.42.00.90

fittings made of base metal, for furnitu...

EU-BTI
7326.20.00

Plastic-coated ring clamps made of base metal for attaching nets or joining fences and branches

EU-BTI
7324.90.0000

caddy, if made of base metal

US-Rulings
8306.29

ornamental metal on wood base

EU-BTI
8306.29.00.00

Decorative items made of non-precious metal, with a circular base and a longitudinal rod in the middle, featuring a cylindrical body (diameter: approx...

EU-BTI
7326.90.98

a terminal with a base plate of steel, c...

EU-BTI
8305.90.00.00

paper clips made of base metal, consisti...

EU-BTI
8302.42.00.90

Base metal rectangular frames

EU-BTI
8302.50.0000

steel mounting bracket kit

US-Rulings
8308.90.00.90

approximately oval flat products made of...

EU-BTI
8306.29.0000

base metal ornament

US-Rulings(+1 similar)
8433.90.00.00

additional weight plate made of cast iron with various coatings, formed into a curved metal sheet, multiple circular holes, dimensions: 2636 mm width,...

EU-BTI
8202.39.00.00

circular, toothed base body made of base metal in different diameters and thicknesses for mounting on drive shafts in circular saws

EU-BTI
8483.30.32.90

flange-like bearing housing made of meta...

EU-BTI
4016.93.00.90

Rubber-steel seals for sealing mounting holes, made from permanently glued layers of rubber and steel sheet, with a circular shape and opening for fas...

EU-BTI
7415.33.00.00

a brass pan head machine screw used to secure box lids to metal conduit boxes and various brass fixings in construction jobs

EU-BTI
8708.99.97

aluminum supporting arm (supporting brac...

EU-BTI
8302.50.00.00

a standard or support of base metal aluminum designed to attach to the wall at a bridge, railing, and attaching a domed television for surveillance pu...

EU-BTI
8306.29

Ornamental articles made of base metal

EU-BTI
9013.90.80.00

lower housing for periscope, constructed from base metal, rectangular shape, imported without optics

EU-BTI
3925.90.10.00

collar base for cable and tube fixation ...

EU-BTI
8466.91.95

Bohrständer for drilling motor, made of ...

EU-BTI
8302.41.10.00

products made from base metal consisting...

EU-BTI
7117.19.9000

The bracelet and rings are made of metal spring coil strung with metal beads, designed for girls ages five years and older.

US-Rulings
8205.59.80.00

kit bellows mounting arm with universal installation metal cone assembly and oil burette

EU-BTI
8204.20.00.00

interchangeable spanner sockets base metal

EU-BTI(+2 similar)
8306.30

mirrors of base metal

FindHS.Codes
click for details
3926.90.97

U-shaped mounting clamps made of polycar...

EU-BTI
3926.90.99

a stand or mast consisting of a hollow tubular shaft with a flanged base, made of ABS plastic

US-Rulings
8419.90.85

a segmented metal insert element, made from several unalloyed metal plates with a specific surface structure and tailored to the application area, des...

EU-BTI
8302.30.00

car parts made from non-ferrous metal, in the form of a multi-folded angle base plate with multiple perforations and moldings, featuring a bolt and U-...

EU-BTI
8714.10

tail section of a motorcycle, made from ...

EU-BTI
7308.90.59.00

sheet steel pole brackets for attaching structural elements, hot-dip galvanized, designed for driving into the ground

EU-BTI
8301.60.00

flat products made of non-precious metal, with specific shapes (e.g. latch nose) and a circular hole (diameter approximately 1.0 cm), used as door loc...

EU-BTI
3926.30.00

foot cast made of plastic for mounting to the base of furniture, consists of three elements with four holes in the upper part and a maximum load of 60...

EU-BTI
3926.90.97

a base plate made of molded plastic, with various recesses and gradations, containing a round holding device on the back with a specifically shaped re...

EU-BTI
7326.90.98.90

a multi-part product made of steel consisting of a circular base plate (diameter approx. 9.5 cm) with four mounting holes, featuring a central hole an...

EU-BTI
8302.50.00

coat hooks made entirely of base metal, in the form of an elongated, approximately rectangular, perforated base plate for wall mounting with brackets ...

EU-BTI
9503.00.99.90

a set consisting of modules with gyro, a...

EU-BTI
8207.70.10.00

a fully metal (steel) made, trapezoid shaped part with a through hole and internal thread, recognizable component for an interchangeable tool - for fi...

EU-BTI
8306.29

Decorative egg-shaped sierei with matchi...

EU-BTI
7326.90.98.90

protective washer, used for protecting a...

EU-BTI
8207.80.11

base metal parts of interchangeable tool...

EU-BTI
8504.90

Specifically shaped and drawn casing par...

EU-BTI
8302.30

support bracket for an exhaust system

FindHS.Codes
click for details
8304

office or desk equipment, of base metal

FindHS.Codes
click for details
7419.80.90.99

metal fixing bracket made from copper al...

EU-BTI
7419.80.90

adapter with a round base plate made of ...

EU-BTI
8421.99.90

ring-shaped connection element made of unalloyed metal, specifically designed for catalytic converters, with special recesses and an outer diameter of...

EU-BTI
7610.90.90

aluminum pillar, powder coated, equipped with base plate and 2 mounting brackets, for permanent attachment and support of windshield cassette

EU-BTI
8482.99.00

Steel ring, made from an annular steel body with mounting holes on the top and bottom, used as the outer ring of a ball bearing for various purposes s...

EU-BTI
8708.99.97.90

black, hot-rolled, low-alloy steel brake hose clamp for motor vehicle right-hand brake hose

EU-BTI
8708.99.97.90

a type of metal fastener, shaped like the letter S, made from low-alloy steel, used to secure the relay of an incandescent spark plug to a vehicle's b...

EU-BTI
8708.99.97.75

aluminum metal fastener used to mount gearbox to vehicle's body with alloy steel screws, consisting of aluminum support

EU-BTI
7326.90.98

a ring piece made from base metal (steel) in various sizes, typically welded to a tube or housing for use in meter production

EU-BTI
7308.90.98

stainless steel handrails with covers or trims, rectangular or circular base with holes for screwing to floor or wall, tubular element protruding

EU-BTI
8203.20.00.00

clamp for handling fragile parts, coated with protective PVC sheath, removable plastic mors in two different hardness levels, and a 3-position sliding...

EU-BTI
7117.19.00

flat, differently shaped items made of b...

EU-BTI
8708.94.99

cylindrical component from base metal, semi-circular on one side, equipped with a semi-circular plate having bronze alloy plating on one side and Tefl...

EU-BTI
7308.90.98.90

fully made of steel, galvanized products in two different sizes, consisting of a round base with engravings and mounting holes, centrally equipped wit...

EU-BTI
8302.42.00

U-shaped handle with circular hole and internal thread at the ends, made of base metal, used as handles on furniture

EU-BTI
8302.42.00.90

base metal fittings for furniture with circular holes and internal threads, used as handles for doors or drawers

EU-BTI
7326.90.98.90

a metal support for a radio signal amplifier, designed to be fixed on a vehicle's bodywork, manufactured from low-alloy steel sheet metal, coated with...

EU-BTI
7326.90.98.90

black-painted, low-alloy steel fuel pump module support bracket with fixing holes, specifically designed to secure the fuel pump module to a vehicle's...

EU-BTI
7326.90.98.90

A metal support used to fix the computer for electronic engine control on motor vehicle bodies, made of die-cast steel slab painted in black with four...

EU-BTI
7317.00.60

clamp made of base metal

EU-BTI
8205.70.00

screw clamp, consisting of a long, rectangular rod made of inferior metal with multiple holes and a millimeter scale at one end for precise mounting, ...

EU-BTI
7326.90

Galvanized Steel 18GA Metal Stamped Bases and Cold Rolled Steel 18GA Painted Metal Stamped Covers

US-Rulings
8306.29.0000

base metal medallions

US-Rulings
8302.10.00.90

T-shaped flat products made of base meta...

EU-BTI
7318.14.10.90

non-ferrous steel screw with a crosshead...

EU-BTI
8302.41.90.00

L-shaped metal fasteners with two throug...

EU-BTI
9021.29.00.00

basic screw, essentially consisting of a...

EU-BTI
8302.50.00.00

steel mounting brackets

US-Rulings
8302.50.00.00

items made of non-precious metal in the form of a slightly tapering 'rod' with a nearly square base plate, which has a central recess with internal th...

EU-BTI
9005.90.00.00

mounting, in the form of a wooden structure with a round base and an arm equipped at the end with a holding element made of plastic and metal. It is u...

EU-BTI
8301.60.00

V-shaped steel bracket with D-shaped weld-on part, used in radiator hoods of construction machinery as counterpart for lock bolt

EU-BTI
7326.90.98.90

bracket, consisting of a mounting base for suspension device on a pole piece, made of metal

EU-BTI
8306.29.00.00

ornate metal decorations in the form of ...

EU-BTI
8306.29.00.00

Decorative metal figures in the shape of...

EU-BTI
3926.90

screws, bolts, nuts etc of plastic

FindHS.Codes
click for details
8538.90.99

A D-SUB connector housing made of non-pr...

EU-BTI
8302.30.00.90

fully made from non-ferrous metal produc...

EU-BTI
7318.15

base metal screw with round cross-head, ...

EU-BTI(+2 similar)
8301.40.90.00

super guard trailer locks, made of base ...

EU-BTI
8302.42.00.90

it is "nab", consisting of a rectangular...

EU-BTI
7326.90.98.90

stainless steel products consisting of a...

EU-BTI
8504.31.80.90

a standard or support of base metal, cas...

EU-BTI
9022.90.20.00

Base Plate Bracket, made of LM25M alumin...

EU-BTI
8305.90.00.00

fully made of non-ferrous metal products, consisting of a sheet cut with a colored coating bent into a clamping device, with two wire-clamped brackets...

EU-BTI
9503.00.99.90

a product used for model cars, consistin...

EU-BTI
7307.91.00.90

Steel flange made of unalloyed steel, ga...

EU-BTI
7326.90.98

base metal kit, made of bent, galvanized...

EU-BTI
8306.29.00.00

ornamental metal products with round bas...

EU-BTI
8302.50.00.00

closely fitting handtowel holders made of base metal, consisting of a rod with circular cross-section and two wall mounting devices located at the end...

EU-BTI
8308.90.00

two-part screw clasps made of base metal...

EU-BTI
8306.29.00.00

Garlands of base metal

EU-BTI
8306.29.00.00

Decorative metal bars with various ornam...

EU-BTI
7308.90.98

a type of facade fixing holder, consisti...

EU-BTI
7616.99.90

composite products consisting of an approximately U-shaped base plate made of aluminum with two oval holes and angled sides, a rail-like element made ...

EU-BTI
8538.90.99.99

a nearly square base plate with a plastic mold piece equipped with holes and fastening devices, designed exclusively as a housing part for a screw cla...

EU-BTI
8305.90.00.00

wire clips made of base metal

EU-BTI
8305.90.00.00

wire office clips made of low-grade metal, covered with a colored plastic coating, packed in a plastic bag with product information, containing 150 pi...

EU-BTI
8305.90.00.00

office clips made of wire from non-alloy metal, covered with colored plastic coating, packaged in a plastic bag with product information, includes 60 ...

EU-BTI
8305.90.00.00

bent wire clips, colored plastic coated,...

EU-BTI
8708.99.97.90

a metal support used to mount a car's alternator and compressor, made from aluminum alloy casting, featuring fixing holes and a specific form

EU-BTI
7307.93.99.90

T-connector fitting from carbon steel AS...

EU-BTI
8309.90.90.90

base metal stoppers

EU-BTI
7308.90.98

Stainless steel handrails with flat base and protruding tubular element, available in rectangular and circular models

EU-BTI
8302.50.00.00

composite products made of non-ferrous m...

EU-BTI
8305.90.00.00

office clamps of base metal

EU-BTI
9403.99.10

desk base (desk frame) made of base meta...

EU-BTI
3926.90.97.90

disassembly frame made of plastics, cons...

EU-BTI
8302.50.00.00

hook rail of base metal with 3 clothes hooks, 2 small plastic windows for inserting photographs and foam backing

EU-BTI
8302.50.00.00

hook rail with 3 swiveling hooks and ceramic balls, hung over door

EU-BTI
9503.00.39.90

A construction kit designed for children...

EU-BTI
9015.90.00.00

a set for assembly consisting of a specifically formed base plate with central opening (similar in shape to a triangular form; edge length: approx. 20...

EU-BTI
8473.29.0000

plastic base components for use with a point of sale (POS) terminal

US-Rulings
9026.90.00.00

Process connection, consisting of a spec...

EU-BTI
8708.99.97.90

a reinforcement bracket made of metal, designed for the centre console inside a vehicle

EU-BTI
7326.90.98.90

Mounting brackets made of steel

EU-BTI
7308.90.59.00

pole brackets made from 2mm thick hot-dip galvanized sheet steel, for attaching structural elements with a square cross-section to structures that can...

EU-BTI
7326.90.98

tie bracket with a base plate of steel, ...

EU-BTI
8302.30

license plate holder

FindHS.Codes
click for details
8302.41.10.00

Straight barrel bolt used for securing door to frame, made of base metal and white thermoplastic

EU-BTI
7318.19.00

semi-finished carbon steel wire, galvani...

EU-BTI
8203.20.00.00

unfinished metal housing, specifically designed for manufacturing a Schiebehülsenwerkzeug (Presszange) press tool, used to compress Rohrmuffen onto pi...

EU-BTI
7117.90.00.00

Decorative metal elements with a hollow ...

EU-BTI
7318.22.00

washer with an inner diameter of 8.4 mm, an outer diameter of 21 mm and a thickness of 4 mm, used between fasteners and material in an airfreight cont...

EU-BTI
8466.94.00

component of sheet metal working moulds, mounted on the upper base of the mold which comes into operation when it comes into contact with the wedge in...

EU-BTI
8302.50.00.00

four metal hooks on a wooden strip with ...

EU-BTI
7318.13.00.90

eye screw made of steel with a metric thread, consisting of various components including circular base (pot) with integrated permanent magnet and plas...

EU-BTI
8302.41.10

two multi-part products made of non-ferrous metals, consisting of a double-cut 90-degree angle sheet cutout with U-shaped cross-section, rectangular b...

EU-BTI
7326.90.98.90

Aufbockung; V-förmige Bauelemente aus Stahl, mit Aussparungen und Montagebohrungen, für die Einrichtung von Decken-Leichtkrananlagen in Gebäuden mit n...

EU-BTI
8302.41.10

T-shaped hinges for glass doors, made of...

EU-BTI
8302.30

longitudinal products made of non-ferrous metal (steel), featuring regularly spaced recesses and bolt holes along their entire length, used for securi...

EU-BTI
3926.90.97

a connector made of injection-molded plastics with a metal screw at each end, used for mechanically connecting railway tracks

EU-BTI
7307.91.00.90

Steel flange made of unalloyed steel (S3...

EU-BTI
8302.50.00.00

chrome-plated towel holder, consisting of a rectangular fastening device made of inferior metal (zinc die-casting) and a round rod made of inferior me...

EU-BTI
8306.29.00.00

base metal garden decoration

EU-BTI
8308.90.00

folding closures consisting of a rectangular frame made from base metal, used for tensioning lashing straps

EU-BTI
8308.90.00.90

items made of base metal, consisting of a rectangular frame approximately 44 mm long and 25 mm wide with a 'clasp closure', used for tightening drawst...

EU-BTI
8301.60.00.90

fully made of non-precious metal, shaped...

EU-BTI
8308.90.00.90

Fasteners, locks of base metal,

EU-BTI
7307.99.80.98

Steel pipe connectors. The products are metallic hollow products made of other than non-ferrous steel. They have a corrugated hose end at one end and ...

EU-BTI
7107

base metals clad with silver

FindHS.Codes
click for details
8302.50.00.00

fully made of non-ferrous metal products...

EU-BTI
3926.90.97.90

fastening clips for electrical cables, c...

EU-BTI
8302.30.00.90

fully made of non-ferrous metal, specifi...

EU-BTI
7616.99.10.99

Aluminum screw clips consisting of an aluminum pressure casting body with two half-round recesses for rods or bars from 10 to 50 mm and an adjustable ...

EU-BTI
8302.42.00.90

base metal handle with circular hole and internal thread, used as a fitting for furniture such as doors or drawers

EU-BTI
8308.20.00

Parts of hollow rivets, of base metal

EU-BTI
4202.92.19.00

a pen case with a predominantly plastic ...

EU-BTI
8302.42.00.90

elongated U-shaped handle, made of base metal, with threaded hole at end, used for attaching to kitchen furniture

EU-BTI(+1 similar)
8302.30.3060

steel frame and mounting kit

US-Rulings
8548.00

low voltage electrical cable crimp connectors for mounting passive elements and copper wire, insulated type, with brass or copper welded on circuit bo...

EU-BTI
7616.99.90

aluminum protective cover, approx. 108 x 82 x 45 mm, used to protect control units for cooling system in airfreight containers for temperature-control...

EU-BTI
8302.10.00.90

hinge products made of non-precious metal, consisting of two interconnected parts with a special contour, featuring specific holes, recesses, depressi...

EU-BTI
7616.99

die-cast aluminum bracket with gradation...

EU-BTI
7307.91.00.90

Steel flange made of unalloyed steel (ma...

EU-BTI
7307.91.00.90

A steel flange made of unalloyed steel (...

EU-BTI
8302.50.00.00

U-shaped, curved steel wire pieces with ...

EU-BTI
8302.42.00.90

rectangular metal products with two hole...

EU-BTI
8536.69.30

D-SUB connector, essentially consisting ...

EU-BTI
8302.10.00.90

parts made of uned metal for hinges (sas...

EU-BTI
7318.19.00.90

Zinc-plated steel plate with two threade...

EU-BTI
8302.50.00.00

composite products made of base metals, consisting of a rectangular mounting device made of zinc die-casting and two parallel rods made of brass, with...

EU-BTI
8538.90.99.99

a specifically shaped part of a switch position 8535 made from non-precious metal with an approximately H-shaped base form and application-specific sh...

EU-BTI
8538.90.99.99

a specifically shaped part of a switch position 8535, made entirely of non-precious metal, with an approximate H-shaped base form and application-spec...

EU-BTI
8538.90.99.99

a specifically shaped part of switch position 8535 made entirely of non-precious metal, with a lightweight L-shaped base form featuring application-sp...

EU-BTI
8538.90.99.99

A specific component of switch position 8535, made entirely of non-precious metal, with a circular opening and functional formations and recesses. It ...

EU-BTI
8302.20.00

Castors of base metal

EU-BTI(+2 similar)
8483.30.80.90

gabel mounting system MP 2, consisting o...

EU-BTI
7326.90.98.90

a desk mount for LCD monitors made of ba...

EU-BTI
8302.42.00

decorative metal fixtures for furniture, used to adorn the ends of table legs or between legs and tabletops

EU-BTI
9209.92.00.00

stand for bass, made of non-precious metal, adjustable in height and length, used to hold a music instrument (bass), consisting of a V-shaped base wit...

EU-BTI
8302.10.00.90

fully made of inferior metals, massive products (so-called hinge brackets), consisting of a L-shaped worked base body and a cylindrical bolt, which is...

EU-BTI
7419.80

brass structure partially threaded, made from 57-61% copper and 38% zinc alloy, used for lubrication on linear guide blocks

EU-BTI
3926.90.97

Arretierungsleisten with a top made of v...

EU-BTI
8302.30.00.90

other fittings of base metal for motor vehicle bodies and their parts, with numerous differently shaped perforations

EU-BTI
8302.50.00.00

fully made of non-ferrous metal products...

EU-BTI
7326.90.98.90

steel mounting specifically designed to mount devices directly to a wall or a mounting surface

EU-BTI
7117.19.00.90

Decorative metal pieces with a hollow sh...

EU-BTI
8424.90.80.80

specifically designed product made from non-precious metal with dimensions of approximately 600 x 248 x 80 mm, featuring circular spray openings (rain...

EU-BTI
8308.90.00.90

round metal and plastic products with a ...

EU-BTI
9209.99.70.00

round, cylindrical drum body made of bas...

EU-BTI
8413.91.00

kidney-shaped base plate made of base metal, manufactured according to technical drawings, intended for installation in a rock slide unit of a concret...

EU-BTI
8448.39.00.00

mounting for brushes in the form of a function-specifically designed, trapezoidal insert element (base area: 96 mm x 90 mm) made of unalloyed metal wi...

EU-BTI
8302.50.00.00

a double hook made of non-ferrous metal mounted on a rectangular wooden plate, featuring a recessed square ceramic tile with floral pattern on the fro...

EU-BTI
8538.90.99

Housings for connection boxes in various...

EU-BTI
4016.99.52

rubber and metal gear mounting for vibration damping, consisting of a metal holder with holes and screws for installation, equipped with rubber elemen...

EU-BTI
7307.99.80

disc-shaped metallic bodies made from solid steel other than stainless steel (material designation S355J2 or C45), used as blind plugs for closing pip...

EU-BTI
8421.99.90.99

ring-shaped connection element, specifically designed according to technical drawings, made of unalloyed metal with special recesses and an outer diam...

EU-BTI
9013.90

metal coupling tube with metal coupling ...

EU-BTI
8306.29.00.00

Decorative anchors made of non-precious metal in three-dimensional form, wrapped with a jute fabric band and featuring a loop with a fabric band as a ...

EU-BTI
7308.90.98

steel products consisting of a ring-shaped base plate with four evenly spaced mounting holes, a hollow cylindrical tube section, and an M12 hex head b...

EU-BTI
8310.00.00

Round products made of non-ferrous metal...

EU-BTI
7318.19.00.90

a so-called insert, galvanized, threaded...

EU-BTI
8302.30.00.90

fasteners consisting of an elongated base plate with three mounting holes and a lever handle, used in motor vehicle construction

EU-BTI
7307.29.10.90

T-stub pipe connectors made of stainless...

EU-BTI
7307.29.10.90

T-connector pieces with thread made of s...

EU-BTI
8308.10.00

flat sheet metal pieces made of inferior...

EU-BTI
7907.00.00

angled zinc hollow products with a copper alloy holding plate, plastic water supply, and connections for attaching to a hose or water tap, designed fo...

EU-BTI
7117.19.9000

The submitted sample consists of a pair of gold toned base metal hoops measuring ½ in diameter, with a spring loaded disk allowing them to be worn on ...

US-Rulings
8302.30.00

fully made of non-ferrous metal products consisting of a stamped base plate and a bracket attached to it. The base plate has nearly the outline of an ...

EU-BTI
7326.90.98.90

part of metal housing for power unit

EU-BTI
8529.90

housing part, specifically manufactured according to technical drawings, made of plastic, with base plate and thermal pads, recognizable for use as a ...

EU-BTI
7326.90.98.90

pole made of stainless steel based on a steel base, with a closure system and a textile strap, used for crowd control at theatre and cinema entrances

EU-BTI
9503.00.99.90

Wire model car part with plastic end pie...

EU-BTI
7326.90.98.90

board liaison PLUS, made of sheet steel with a thickness of 2.5 mm or 4 mm, hot-dip galvanized and fitted with holes

EU-BTI
8302.41.90.00

mobile door handles for mobile room dividers, consisting of a nearly square housing made of base metals with a central opening, four metal wheels, and...

EU-BTI
8302.41.90.00

housings with an almost square base made...

EU-BTI
7325.99.10.90

cast iron holder clip, composed of metal...

EU-BTI
7325.99.10.90

Cast iron clamp, consisting of cast meta...

EU-BTI
7325.99.10.90

Cast iron support bracket, consisting of a C-shaped element and fastening parts made of spheroidal graphite cast iron and non-alloy steel, superficial...

EU-BTI
7318.19.00.90

quadratic steel products with internal t...

EU-BTI
8482.99.00

Stahlring, for use as outer ring of ball bearing for various purposes such as construction machines and drill equipment

EU-BTI
7326.90.98

Products consisting of a nearly rectangu...

EU-BTI
7307.91.00.90

Flange made of steel, specifically SAE 12L14 unalloyed steel, with a mounting hole and a socket for connecting pipes, designed for use in pipe connect...

EU-BTI
8302.30.00

a connecting device made of base metal consisting of a stepped cylindrical product with a wire rope with a covering and a screw, washer, and safety wa...

EU-BTI
8302.41.10.00

unassembled sliding door system for doors, consisting of a 200 cm long track with matching wall fixings, two roller supports, two door stoppers, floor...

EU-BTI
7308.90.98

a truss base made of steel flat bars wit...

EU-BTI
8302.60.00

metal products, consisting of a rectangular housing, shaped according to use and equipped with a screw shaft, intended for automatic door closers

EU-BTI
8302.42.00.90

items consisting of a galvanized steel bracket (characteristic), screwed into a plastic housing, for mounting in a kitchen cabinet, which is hung from...

EU-BTI
8302.42.3065

mounting brackets made of aluminum

US-Rulings
8302.10.00

hinges for windows with inter-connected ...

EU-BTI
8412.90.40.90

a tank made of steel or aluminum metal, specifically formed for use in hydraulic systems of railway vehicles and military vehicles, available in multi...

EU-BTI
8205.59.80.00

a six-sided, cube-shaped tool with a free arm for manual handling, made of inferior metal and plastic, consisting of a steel box with an open top, con...

EU-BTI
8608.00.00.00

weight plate, specifically designed metal plates with four mounting holes and rounded edges, approximately 650 x 240 x 10 mm in size, serves as a coun...

EU-BTI
8307.90

flexible tubing of other base metal

FindHS.Codes
click for details
9603.90.99.00

A collection consisting of a so-called '...

EU-BTI
8541.90.00

Base plate made of non-ferrous metal, sp...

EU-BTI
8431.49.80

a steel bracket consisting of a flat, form- and function-specific steel plate with mounting holes and a specifically curved steel element attached to ...

EU-BTI
8302.41.6080

steel mounting for a building

US-Rulings
8306.29.00.00

approximately 80 cm long rods made of no...

EU-BTI
7326.90.98

a composite article in the form of a pla...

EU-BTI
Multiple Codes

base plates

FindHS.Codes
click for details
8302.30.3060

carbon steel base plate for an electronic floor pedal assembly in commercial trucks with Caterpillar engines

US-Rulings
3926.90.97.90

A plastic end cap with a screw made of inferior metal, used as an end element for a cable rail

EU-BTI
8548.00.90.99

TO-Sockel, with a round base plate made of unalloyed metal with twelve electric contact elements fixedly installed, isolated from the base plate by gl...

EU-BTI
7326.90.98.90

a product made of steel consisting of a round base plate (approx. 12 cm in diameter) with two mounting holes, featuring two overlapping, intersecting ...

EU-BTI
7318.14.10.90

non-ferrous metal screws made of stainle...

EU-BTI
7326.90.94

mounting plates for terminal boxes made of stainless stamped steel, rectangular shape with rounded corners, slightly longer in the center

EU-BTI
8308.10.00

flat products made of non-ferrous metal,...

EU-BTI
8302.30.00

fully made from non-ferrous metals, consisting of a base plate with specific recesses, holes and depressions, to which an approximately U-shaped tube ...

EU-BTI
9031.90.00.00

Halter as a stamped part made of low-grade metal with a thickness of approximately 1.3 mm, featuring five holes, used for mounting and setting a senso...

EU-BTI
7604.21.00.90

hollow profile made of aluminum alloy, serves as a base element in combination with connecting nodes for the production of furniture that has a frame ...

EU-BTI
9003.11.00

frames for prescription glasses made of plastic with base metal elements, available in various shapes and colors for mounting corrective lenses

EU-BTI
7326.90.98

protective washer, used for protecting the attachment of cooling units in airfreight containers for temperature-controlled goods, protects nut against...

EU-BTI
8302.42.00.90

stainless steel products consisting of a...

EU-BTI
8306.10.00.00

coloured, spherical washers with a diame...

EU-BTI
8481.90.00.90

zylinderförmiger Sockel aus Zinkdruckguss mit verchromter Oberfläche, Teil einer Sanitärarmatur

EU-BTI
8310.00.00.00

oval name tags made of base metals with a two-part magnetic closure and logo printed on the front, packaged in a plastic bag. The product is approxima...

EU-BTI
7308.90.98.90

thermal regulator in a collective heating installation, consisting of various metal elements including alloy steel tubes and parts, cast iron filter, ...

EU-BTI
8302.50.00.00

Decorative coat hooks made of base metal...

EU-BTI
9503.00.99.90

a gold-colored washer with a ridged flange, intended for use in model car kits and complete model cars, featuring a tooth-like design

EU-BTI
9405.99.00.90

adapter for LED light source, made of non-precious metal, consisting of a round aluminum housing, designed for connecting an optical fiber cable to an...

EU-BTI
7326.90.98

diamond-shaped steel base plates with u-...

EU-BTI
8487.90.90.90

Base metal for construction of mold used...

EU-BTI
9506.12.00.00

mount alpine mold, made of plastic with a metal part

EU-BTI
8302.41.10

conical spacers made of aluminum alloy, about 6.3 cm high, with a rounded recess and two threaded holes for M6 screws, used as connection elements bet...

EU-BTI
7308.90.98

galvanized steel products consisting of a square base with four round holes in its corners, a short section fixed in the center, and a clamping plate ...

EU-BTI
7308.90.98

galvanized steel products consisting of a square base with round holes, a channel section and a clamping plate, used for supporting various installati...

EU-BTI
8708.80.55

stabilizer, made of alloy steel, with a rod-shaped base body, a steel arm and two rubber pads, used to connect the right and left wheel suspension of ...

EU-BTI
8302.41.10

metal products, specifically shaped for use as components in lockable flush button fittings and coin-operated door openers, featuring a disc-shaped to...

EU-BTI
8302.30.00

other fittings made of base metal, specifically designed and shaped to attach a terminal to the body (B-pillar) of a tractor

EU-BTI
8535.90.00

electrical device for connecting electrical circuits, for a voltage of more than 1000V, not from Subheadings 8535 10 to 8535 40, earthing ring

EU-BTI
8302.42.00

accessories kitchen cabinets made of bas...

EU-BTI
8546.90.10

plastic electrical insulators on metal r...

EU-BTI
8302.42.00

flat, round discs made of inferior metal with a central, circular hole and an additional offset hole with a smaller diameter and one-sided recessed, u...

EU-BTI
3925.90.10

plastic curtain rod tip, made of plastic material and equipped with a metal rod, used for the permanent fixing of a curtain rod to a window

EU-BTI
8538.90.99.99

a mechanical wire or cable clamp made from a square metal block with rectangular cutouts on the front and back, and a threaded hole on top, designed e...

EU-BTI
8302.42

fully made of non-ferrous metal rods wit...

EU-BTI
8302.42.00.90

rectangular metal products with two blind holes, double hook-shaped at the front side, used as locking elements for securing switch cabinet doors

EU-BTI
8306.29.00.00

hollow, spherical products made of base ...

EU-BTI
7308.90.59

a steel base for fixing a pole, consisti...

EU-BTI
7616.99.90.99

a set of angle pieces for a light grid floor covering, consisting of four corners made from an aluminum alloy with predominantly aluminium content and...

EU-BTI
7610.90.90

u-shaped connecting elements made from aluminum alloy with four oval recesses, used between solar mounting rails, packed with steel hammerhead screws ...

EU-BTI
7318.11.00

screw with thread, stainless steel, hexa...

EU-BTI
8306.29.00.00

decorative metal arches made of inferior...

EU-BTI
8308.90.00.90

Shoe clasps made of base metal with a nearly oval frame and a middle rib, featuring a single movable pin in the middle, adorned with glass stones, des...

EU-BTI
8535.90.00.89

1/2" 18-22mm grounding shell and DN 20 -...

EU-BTI
8302.50.00.00

fully made of non-ferrous metal products...

EU-BTI(+1 similar)
7323.99

clothes hanger of base metal, made of po...

EU-BTI
7323.99

hanger clothes hanger of base metal, wit...

EU-BTI(+6 similar)
7412.20.00.00

Metal threaded pipe fitting adapter, 3/8" BSP female, made of brass for use with plumbing systems.

EU-BTI
7326.90.98

steel holder used for mounting

EU-BTI
8411.91.00.90

ring-shaped metal body with specific cross-section and numerous mounting holes, with an outer diameter of approximately 507 mm, unfinished (see annex ...

EU-BTI
7318.15

steel screws with cylindrical head, groo...

EU-BTI
8539.90.10.00

a lamp base made of aluminum that is designed to be screwed into place, it comes with a compact fluorescent light (CFL) contained within

EU-BTI
9026.90.00.00

Stainless steel products, including a rectangular base plate with holes in the corners and a cylindrical holding device, and a hollow cylinder carrier...

EU-BTI
8546.90.10

Electric rail support, made from a specifically shaped plastic part with metal parts for securing and mounting a power rail, designed for electrical i...

EU-BTI
8424.90.80.80

a specifically designed, ring-shaped product made from non-precious metal with an outer diameter of approximately 38 mm, featuring an inner thread and...

EU-BTI
7318.15

stainless steel screws with cross-head a...

EU-BTI
7326.90.98.90

Screw anchor with base made entirely of ...

EU-BTI
7318.15

galvanized steel bolt with round flat he...

EU-BTI
8205.59.80

a rectangular wooden pull adapter, part ...

EU-BTI
7308.90.98

it is a facade point holder, a threaded ...

EU-BTI
8481.90.00

the so-called mounting plate is a round chromium-nickel steel that is screwed into an underplate. it has a rectangular opening for the operation handl...

EU-BTI
8483.30.80.90

The product is a cylindrical hollow body in various executions made of sintered iron, sintered bronze or brass. It has an inner diameter of 4 to 300 m...

EU-BTI
8308.10.00.00

fully made of non-ferrous metal, nearly U-shaped products with an outer thread at both ends, equipped with a 'cross bolt' secured by two locking nuts,...

EU-BTI
8302.50.00

coat hook made of Zamac with Verschroomd...

EU-BTI
9027.90

a quadrangular product made of non-preci...

EU-BTI
7326.90.98.90

steel mounting bracket (bracket), attach...

EU-BTI
8308.20.00.90

nit picked tubular aluminum, designed to...

EU-BTI
8411.91.00.90

ring-shaped metal body with specific cross-section and multiple mounting holes, with an outer diameter of 500 mm, unfinished, designed as a housing pa...

EU-BTI
8302.42.00.90

quadrangular housing, made of base metal, with open front side, having an L-shaped fastening device on the narrow sides for plug-in modules

EU-BTI
7308.40.00

so-called base plate with item number 15...

EU-BTI
8714.99.90.89

a part for bicycles, consisting of a fra...

EU-BTI
8538.90.99.99

"Steckverbindergehäuse" - cylindrical metal housing with mounting flange for use as a connector housing, designed exclusively for electrical device 85...

EU-BTI
8538.90.99.99

connector housing - from a cylindrical metal body with mounting flange - for use as housing for an electrical connector, "part solely intended for an ...

EU-BTI
8306.29.00.00

LED metal design decoration 'Kegel', com...

EU-BTI
8412.90.40.90

A cylindrical insert element made of low-grade metal and rod seals, with an outer thread and mounting holes (see illustration), is designed for instal...

EU-BTI
3926.90.97.90

The lower base support, a plastic compon...

EU-BTI
7308.90.98.90

complete steel products, galvanized, in two sizes, consisting of a circular base with engravings and mounting holes, and a central sleeve fixed to the...

EU-BTI
9021.10.10.00

Buccal Tubes Directbonding, semi-circula...

EU-BTI
7308.40.00

Construction parts made of iron or steel, consisting of two nearly circular clips with two holding hooks and a screw with nut, used in construction

EU-BTI
8305.90.00.00

staples made of base metal

EU-BTI
8302.41.10

zinc-plated steel fitting, consisting of a bracket with 8 holes and an oblong, used for assembling doors in glass partition systems

EU-BTI
8487.90.90

A product made from a nickel alloy, used...

EU-BTI
8301.60.00.90

cylindrical metal products with multiple specific recesses and step-downs, featuring a central axial pin at one end, used as transfer elements within ...

EU-BTI
8479.90.70

a specifically designed, unfinished steel product from a plate with recesses and holes (see annex), serving as a guide and fastening part for a blade ...

EU-BTI
8548.00

TO-Sockel, consisting of a round base plate made of non-ferrous metal with six fixed, electrically conductive contact pins isolated from the base plat...

EU-BTI(+1 similar)
7326.90.98.90

mounting system for flat screen television, console/bar steel with fixing screws and small parts in plastic and aluminum

EU-BTI
8536.69.30

plastic housing with mounted metal terminals, intended for application on a PCB for the automotive industry

EU-BTI
8504.90

Mounting frame, made from a sheet metal part produced by punching and bending according to the drawing, exclusively for use as a mounting frame for th...

EU-BTI
8302.42.00.90

products in the form of a specifically s...

EU-BTI
7326.90.98

housings with a base area, narrowed middle area, and two slanted fork-shaped side walls for holding rollers

EU-BTI
8302.10.00

semi-circular corner shower cabin, enclosed, without shower tap and without shower tray, unassembled. it consists of aluminum elements

EU-BTI
7318.12.90

wood screw with steel white zinc coating in the form of bracket screw, suitable for plumbing and wood mounting clamps

EU-BTI
7325.99.10.90

metal casting in the shape of a 'tree', ...

EU-BTI
8436.80.90

a device for distributing animal feed, c...

EU-BTI
8301.60.00

flat products made of non-ferrous metal, with specific shapes (e.g. lock nose) and a circular hole (diameter approximately 1.0 cm), used as door locki...

EU-BTI
8306.29.00.00

LED metal design decoration 'Spirale' - ...

EU-BTI
8302.30.3060

a triangular shaped, steel bracket used in automobile manufacturing, situated inside the vehicle’s engine compartment and affixed to the fuel line by ...

US-Rulings
8302.50.00.00

metal bracket

EU-BTI
8302.50.00

Metal brackets made from diecast aluminum for wall mount camera

EU-BTI
8302.50.00

metal brackets made from die-cast aluminum for wall mounting cameras

EU-BTI
8473.30

a small metal bracket used in a computer, designed exclusively for use in a Gateway computer

US-Rulings
9016.00.2000

a metal bracket from China used in scales produced by Scientech, Inc.

US-Rulings
3926.90.97.90

specifically shaped plastic base plate f...

EU-BTI
8306.29.00.00

Decorative garden planters, consisting o...

EU-BTI
7308.90.98

U-shaped base for mounting poles, made o...

EU-BTI
7308.90.98

a U-shaped steel base for mounting poles...

EU-BTI
7323.99.90.80

The Olympia WorkGear storage cabinet is a metal cabinet with 4 sliding and removable drawers containing divided compartments for nuts, bolts, washers,...

US-Rulings
8306.29.00.00

Decorative bowls made of colored base metal with oval base, equipped with two handles and no holes in the bottom, used for decorating living rooms or ...

EU-BTI
8473.30.80.00

Connectivity Foot, also known as Standfu...

EU-BTI
8306.29.00

decorative metal fittings for framing ce...

EU-BTI
7616.99.90.99

aluminum brackets 'tube' with ball joint...

EU-BTI
7616.99.10.99

cast-aluminum extension arms with toothe...

EU-BTI
7307.91.00.90

Steel flange made of unalloyed steel (S355JO material) with 4 threaded holes, one side worked out as a pipe end connection with welding ends. It is us...

EU-BTI
7307.91.00.90

Steel flange made of unalloyed steel (ma...

EU-BTI
7307.91.00.90

Steel flange made of unalloyed steel (ma...

EU-BTI
8302.41.90.00

white metal tracks with a D-shaped channel and a plastic insert, used for securing the fabric of a double roller

EU-BTI
8536.69.30

D-SUB connector, essentially consisting of a specifically shaped base metal housing with a 15-pin D-Sub socket on the front and the corresponding numb...

EU-BTI
3926.90.97.90

plastic end cap with three screws made o...

EU-BTI
3926.30.00.90

bewatec universalaufnahme, made of glass...

EU-BTI
8302.42.00

adjustable height elements for chairs, m...

EU-BTI
8609.00.90

a container made of base metal with features such as folding walls, recesses for easy fixing, and a hinge for half-open folding, designed for door-to-...

EU-BTI
8708.30.91.90

a steel plate, also known as a plate or ...

EU-BTI
8302.42.00.90

fully made of non-ferrous metal products with angled side elements, each having a hole with internal threads, equipped on the underside with two cubic...

EU-BTI
8305.90.00.00

spring clips made of base metal, approxi...

EU-BTI
8302.50.00.00

fully made of non-ferrous metal products...

EU-BTI
Multiple Codes

mountings fittings and similar articles for buildings

FindHS.Codes
click for details
8487.90.90.90

A base plate made of a circular, curved stamped part from a nickel alloy, with a varying number and arrangement of holes for connection pins and a con...

EU-BTI
8306.29

balls made of chrome, hollow, spherical ...

EU-BTI
8305.90.00.00

sample clips; they are made of base meta...

EU-BTI
7324.90.00.90

Ablaufventil; disc-shaped products made ...

EU-BTI
8538.90.99.99

a specifically shaped part of a position 8535 load switch, made entirely of non-precious metal. it has application-specific shapes, multiple circular ...

EU-BTI
8302.50.00.00

composite products made of base metals, ...

EU-BTI
8302.50.00.00

composite products made of base metals, ...

EU-BTI
7326.90.98

chrome steel clamp with nuts and bolts, ...

EU-BTI
8483.40.30.90

Axes to include the following:
- Of...

EU-BTI
7326.90.94.90

fully made of steel, forged products with a flat mounting plate at one end and a cup-shaped design at the other end, suitable for use as a pulling dev...

EU-BTI
7307.91.00.90

Steel flange made of unalloyed steel (S355J2 material) with 4 bolt holes, one side is a 90° turned pipe end with internal thread. It connects pipes or...

EU-BTI
8306.30.0000

metal base for a picture frame

US-Rulings
7610.90.90.10

hollow rail profile in the shape of an i...

EU-BTI
8308.90.00.90

T-shaped flat products made of base metals, with a narrow end (so-called insert nose) having a rectangular recess, and the other end having a slit alo...

EU-BTI
8536.50.80

blind control insert made of base metal for flush-mounting

EU-BTI
7318.11.00

lag screw, base metal, length: 75-200 mm...

EU-BTI
9003.19

CAZAL 521 frame, made from non-precious ...

EU-BTI
9003.19

CAZAL 516 metal frame, made of inferior ...

EU-BTI
9022.90.20.00

aluminum alloy base plate with composite...

EU-BTI
7418.20.00.90

catalouge siphons, made of brass with a ...

EU-BTI
8466.94.00.00

Pre-assembly attachments for a machine f...

EU-BTI
7616.99.90.99

Non-alloyed aluminum T-profile mounting accessory for showcases with variable lengths (43mm, 240mm, 288mm, 378mm), width of 45mm, and height of 28mm, ...

EU-BTI
7308.90.98

steel products consisting of a square base with round holes in corners, a C-section welded in the center, and a clamping plate with threaded holes, eq...

EU-BTI
7308.90.98

galvanized steel products consisting of a square base with round holes in its corners, a C-section welded in the center, and a clamping plate inside t...

EU-BTI
7323.99.00

two-part baking tins, sheet steel constr...

EU-BTI
7326.90.98

hollow cylindrical casing surface profiling, made of steel housing for insertion into plastic molding forming the wall of a circular hole

EU-BTI
8301.70.00.00

t shape key for opening doors of electri...

EU-BTI
8301.70.00.00

spare key for base metal lock

EU-BTI
7326.90.98.90

U-shaped mounting device made of steel

EU-BTI
7326.90.98.90

galvanized steel square base used for fixing rails to a power pole

EU-BTI
8302.10.00.90

mass-produced items made of unalloyed metal, with a U-shaped profile in side view and rounded ends, featuring continuous transverse notches, equipped ...

EU-BTI
7326.90.98

stainless steel sheet metal parts in the form of brackets for machines used in paramedical applications

EU-BTI
7308.90

fully chrome-plated steel products consi...

EU-BTI
8302.20.00.90

castors made of base metal

EU-BTI
7326.90.98

waterfall, water cannon, or swimming pool fountain made of stainless steel, with polished or brushed finish, mounted with anchoring plate and screws

EU-BTI
7323.99.00.90

chrome plated steel wire holders with tw...

EU-BTI
7318.29.00

a composition of goods consisting of a metal bolt made of alloy steel and a slotted metal dowel pin, packed in a plastic bag, used as a spare part for...

EU-BTI
8411.91.00.90

a ring-shaped metal body with a specific cross-section and numerous mounting holes, with an outer diameter of 509 mm, unfinished, designed for use as ...

EU-BTI
8310.00.00.00

a company logo product made from base metal, consisting of two letters and a lettering placed underneath with adhesive tape on the back

EU-BTI
7616.99.10.99

universal aluminum alloy mounting bracket with high mechanical resistance, compatible with 5/14 and 5/15 sleepers, suitable for various applications s...

EU-BTI
7307.91.00

a metal, round flat product (diameter approximately 550 mm) with central hole (diameter approximately 319.5 mm) and 12 screw holes, formed from fine s...

EU-BTI
8306.29.00.00

garden stakes in the form of stylized bird heads made from non-prestigious metal, coated with color, used for decorating gardens

EU-BTI
8538.90.99

Connector housing part, made from a specifically shaped metal frame, designed for use as a connector housing component

EU-BTI
8302.30.00.90

long, H-shaped products made from non-precious metal, consisting of a base plate with mounting holes, a pivotally attached lever handle, and a device ...

EU-BTI
8302.30.00.90

fully made of unalloyed metal, long products consisting of a base plate with rectangular base area and side walls, a flat lever handle attached to the...

EU-BTI
7326.90.98

mounting clip with screw for attaching c...

EU-BTI
8411.91.00.90

Ring-shaped metal body with specific cross-section and numerous mounting holes, unfinished, with an outer diameter of 507 mm, designed as a housing pa...

EU-BTI(+2 similar)
7609.00.00.90

aluminum flange, used as a connection element between tubing and condenser in a vehicle's climate system, made of aluminum with a specific bore

EU-BTI(+2 similar)
7609.00.00.90

aluminum flange, a flat, elongated product made of aluminum with a specific bore, used as a connection element between the condenser and the tubing in...

EU-BTI
8302.42.00.90

fully made of non-ferrous metal, so-call...

EU-BTI
8302.42.00.90

fully made of non-ferrous metal, so-call...

EU-BTI
8302.42.00.90

fully made of non-ferrous metal, so-call...

EU-BTI
8302.42.00.90

Fully made of non-ferrous metal, so-call...

EU-BTI
8302.60.00.90

fully made of non-ferrous metal, so-call...

EU-BTI
Multiple Codes

mountings fittings and similar articles for motor vehicles

FindHS.Codes
click for details
7326.90.98.90

steel holders with a U-shaped base plate...

EU-BTI
9209.92.00.00

guitar stand, adjustable in height, made...

EU-BTI
7326.90.98.90

square base made of galvanized steel, punched and bent, 3 mm thick, for fixing crosspieces to an electric pole

EU-BTI
7307.19.90.00

Steel cast pipe connector; cast flange. The product is a cast steel flange with four fixing holes. It is welded to the end of a Downpipe and connects ...

EU-BTI
9401.71.00

shell chair with metal base, a piece of seating furniture as a set of 2 or 4, consisting of four metal chair legs and a padded seat shell, covered wit...

EU-BTI
9401.71.00

shell chair with metal base, it consists of a metal frame and a padded seat shell with armrests, completely covered with a textile covering, rotatable

EU-BTI
9403.20.80.00

table with a metal frame made of base me...

EU-BTI
8483.90.89

a steel piece, heat-treated, in the form of a short sleeve with a bolted T-shaped section featuring threaded interfaces, designed for use as a cross-a...

EU-BTI
7318.19.00.90

metal cavity plug with steel screw for t...

EU-BTI
8306.29.00.00

ornamental decorations in the form of st...

EU-BTI
3926.90.97

connector made of molded plastics with pivot bolt and grounding tongue, consisting of plastic mounting bracket for mechanical connection between I/O m...

EU-BTI
9032.90.00.90

ABS housing made of aluminum die-casting, consisting of a technically drawn housing from non-precious metal with specific design, primarily used for r...

EU-BTI
7308.90.98

Base used in constructions for column fi...

EU-BTI
8302.30.00

fully made of non-ferrous metal products, partially coated, consisting of a sheet section specifically worked (shaping) and numerous openings and rece...

EU-BTI
8425.49.00.00

steel winch, made from a massive base plate with a longitudinal housing containing an integrated gear, hand crank and claw hook, made of inferior meta...

EU-BTI
8302.4X

sliding or runner rings

FindHS.Codes
click for details
8310.00.00

round, flat products with a short, massi...

EU-BTI
8301.60.00.90

specifically shaped, rectangular flat products made of inferior metal with rounded front sides. They are formed into a hook on one long side and one f...

EU-BTI
8302.42.00.90

pipe holders made entirely of base metal...

EU-BTI
3926.30.5000

Garnish-Console UPR RR RH (part number 84659-3J000), Stopper-Roof Moulding (part number 87215-2D000), Holder-Bulb (part number 92260-3D000), Bezel-Kno...

US-Rulings
8302.42.00.90

metal rail rails for mounting ASUSTOR 1U...

EU-BTI
7326.90.94.90

metal part, trapezoidal shape with threaded base, made from different alloy steel

EU-BTI
8302.42.00.90

drawer, fittings made of base metal, for...

EU-BTI
7326.90.98.90

trapezoidal steel trays with oval or round holes, designed for use on a ball grill, used to hold charcoal during grilling

EU-BTI(+1 similar)
8306.29.00.00

Decorative vases made of aluminum, approximately 60 cm high, with a base, designed in a cup-like shape, with a maximum diameter of about 36 cm at the ...

EU-BTI
8302.50.00

base metal coat hooks

EU-BTI
7318.14.1060

Framing screws: size 6 x 7/16.

US-Rulings(+1 similar)
7318.29.0000

stainless steel dowel pin used in a hand controller device

US-Rulings
8708.99.97.90

engine mounting, made of a specifically designed aluminum engine bearing with integrated rubber damping element, secured to the motor with five screws...

EU-BTI
7326.90.98.90

Antenna Mounting Plate, made of galvanized steel, designed to fix an antenna to the roof of a car and has a small opening

EU-BTI
8473.30.80

aluminum part for housing data terminal,...

EU-BTI
7318.13.00

component goods consisting of an eye screw made of steel with a metric thread, screwed into a circular base (pot) with integrated permanent magnet, av...

EU-BTI
7324.90.00.90

steel stick angled with plastic componen...

EU-BTI
8548.00

TO-Sockel, consisting of a round base plate made of uned metal with five fixed contact pins isolated from the base plate by glass, for use as a housin...

EU-BTI
3926.30.00

a motor support made of plastics, specifically designed with various recesses and holes to hold electric motors for adjusting car seats, mounted at th...

EU-BTI
8302.42.00

gas-filled pressure tubes made of non-ferrous metal with piston rod and piston, used for lifting, lowering, tilting and damping other furniture compon...

EU-BTI
7326.19.90

stainless steel support, rectangular wit...

EU-BTI
9027.90.00.00

Custom Chamber Hardware Package, consisting of a characteristic fixing plate made of inferior metal and a cylindrical body made of metal for gas guida...

EU-BTI
7610.90.90.95

dismantled fence posts made of hollow al...

EU-BTI
3926.90.97.90

base plate made of molded plastics with ...

EU-BTI
9503.00.99.90

Differential/Anschlussbuchse (Diff Outdr...

EU-BTI
9503.00.99.90

Two-part product made of unrefined metal...

EU-BTI
9503.00.99.90

Differential/Anschlussbuchse (Diff Outdr...

EU-BTI
9503.00.99.90

Connecting Cup-S/L Blizzard, a two-part ...

EU-BTI
8302.41.10.00

products made of base metal, flat plate...

EU-BTI
8302.30.3060

Bracket Condensers, part numbers 047792-0180 and 146542-1880, are finished cast aluminum brackets that function to mount and secure an automotive air ...

US-Rulings
8302.42.00.90

fully made of non-ferrous metals, cylindrical hollow products in various sizes, equipped with a bushing with internal thread (M8) at one end, used as ...

EU-BTI
7616.99.90

Mantona Arca Swiss Base Clamps ASC-50, made of milled aluminum with removable plate holder and built-in spirit levels, used for quickly attaching or r...

EU-BTI
7318.19.00.90

stainless steel products with a square base and an internal thread (hole width: about 8 mm), featuring a slightly inwardly curved spring plate on one ...

EU-BTI
8302.50.00

a restraint, of base metal, in the form of an adjustable wall bracket, made of steel and stainless steel, for mounting a projector on the wall

EU-BTI
7317.00

cylindrical anchor pins with a round fla...

EU-BTI
8538.90.99.99

specific metal form piece in the shape of an upper or lower shell, with a hole and mounting tabs, with or without logo, primarily recognizable for use...

EU-BTI
8477.90.80

specifically manufactured product from non-precious metal with a size of approximately 2654 x 2140 x 70 mm, featuring a specific cutout with dimension...

EU-BTI
7308.90.59.00

pole brackets with foot made of sheet steel with thicknesses of 2 mm and 5 mm, hot-dip galvanized, designed for screwing into the ground to attach str...

EU-BTI
8302.41.6080

powder-coated aluminum body

US-Rulings
8546.90.10

electric insulators made of plastic on s...

EU-BTI
8538.90.99

housing part for a specific connector, made of a specifically shaped metal frame, designed for use as a housing part for a specific connector, identif...

EU-BTI
7318.12.90

wood screws with anti-corrosion zinc coa...

EU-BTI
8515.90.2000

welding machine base assembly

US-Rulings
8306.29.00.00

decorative stands made of aluminium meta...

EU-BTI
7326.90.94

mounting feet for terminal boxes made of stainless stamped steel, rectangular in shape with rounded corners, oval hole at one end and round mounting h...

EU-BTI
8708.99.97.90

a specially designed, elongated holding device made of aluminum, used as a connection element between the motor and motor mount in vehicle engines, se...

EU-BTI
8481.80.79

a mounting head consisting of metal cap, plastic rod, seals, body, spring, ball and tube, for crimping onto bottles

EU-BTI
7308.40.00.00.00

CONCRETE MOLD ADJUSTMENT APPARATUS OF CA...

TR-BTI
8431.49.80

octagonal base plate made of base metal with a square recess and eight holes, used for assembly of column jib cranes and pillar jib cranes

EU-BTI
7616.99.90.99

aluminum base plate holder with shaft at...

EU-BTI
7326.90.98.90

a mounting plate made of steel, used as an aid for placing a recess mold when pouring concrete in a mould

EU-BTI
8302.50.00

long, nearly U-shaped metal products with a coating and multiple circular holes, used as plant pot holders for balconies

EU-BTI
7109

base metals or silver clad with gold

FindHS.Codes
click for details
8302.41.10.00

Items made of non-precious metal with a ...

EU-BTI
7117.19

a circular metal decoration with a peg a...

EU-BTI
7326.90.98.90

steel products, consisting of a rectangular base plate with four holes and an attached downward sloping arm with a swiveling holder equipped with a fa...

EU-BTI
8411.91.00.90

a ring-shaped metal body with a specific cross-section and numerous mounting holes, with an outer diameter of 550 mm, unfinished, intended for use as ...

EU-BTI
8483.90.89.90

cylindrical extension for axles, made of non-ferrous metal, cylindrical with narrow cylindrical tapering, inner shaping, specifically manufactured acc...

EU-BTI
7326.90.98.90

Stellfuß; products consisting of a round...

EU-BTI
3926.90.97.90

a plastic socket with a metal mounting b...

EU-BTI
8306.29

Decorative metal balls, hollow and spher...

EU-BTI
7326.19.90

stainless steel support, rectangular wit...

EU-BTI
8308.10.00

Haken und Ösen aus unedlem Metall für Kl...

EU-BTI
7318.15.82

steel screws with head, hexagon socket and a formed nut part to a ball with flattened top surface, featuring metric thread (M10) extending up to the h...

EU-BTI
8483.40.90

self-aligning ball bearing connection (four-point support), made of low-grade metal with an approximately L-shaped cross-section and mounting holes, c...

EU-BTI
8302.50.00.00.00

hanger made of metal

TR-BTI
8302.41.10.00

T-shaped products made of a core with inferior metal (steel; characteristic) wrapped in plastic, used as middle mullion connectors for insect screens,...

EU-BTI
8308.20.00

hollow rivet with aluminum sleeve and ga...

EU-BTI(+1 similar)
7616.99.90.99

plastic clamp body aluminum spigot and a...

EU-BTI
6913.90.93.90

ceramic decorative item, so-called 'planter in metal stand', consisting of a round, green glazed planter without bottom hole, surrounded by a stylized...

EU-BTI
7326.90.98.00.19

Article made of base metal that allows t...

TR-BTI
8481.90.00.00.00

Housings of sanitary fittings made of 58...

TR-BTI
8708.99.97

aluminum support arm (support bracket) for fixing the gearbox to the car body

EU-BTI
7326.90.98.90

threaded bush, open, cylindrical, approx...

EU-BTI
8302.42.00

a mechanical linkage for mounting furniture body, composed of steel and aluminum elements, with plastic cover, used for lifting furniture doors

EU-BTI
7318.13.00.90

a product consisting of a metric thread ...

EU-BTI
8302.10.00

hinges of base metal for an ice hatch, reportedly made of aluminum with a stainless steel pin and rivets

EU-BTI
8302.10.00.90

hinges, made of base metal, used for an ...

EU-BTI
7326.90.98.90

rectangular base plate made of steel with a plastic coating, featuring an adjustable and foldable support foot with a rectangular holding plate with s...

EU-BTI
8305.90.00.00

fully made of non-ferrous metal products consisting of a rectangular plate with wire reinforcement on the sides, equipped with a movable wire with hal...

EU-BTI
7616.99.90.99

combination of two l-shaped brackets (90...

EU-BTI
8301.40.90.00

u-shaped brackets with a lock body and l...

EU-BTI
7317.00.80.00

round head metal supports made from mild steel, used as insulation fixing to secure insulated plaster board to walls

EU-BTI
8308.90.00.90

quadrangular frame products made of base metals, consisting of a nearly cuboid framework with specific recesses and equipped with a movable cover at o...

EU-BTI
7307.93.19.99

connectors for welding pipe fittings, ma...

EU-BTI
7308.90

fully chrome-plated steel products, cons...

EU-BTI
8419.90.85

Liquid distributor, with steel elements and fastening devices, designed for installation between two flanges to distribute liquid or gas streams

EU-BTI
7616.99.90

flange-type aluminum fixing

EU-BTI
8708.50.99

Wheel bearing with mounting flange, made from base metal, consisting of a wheel bearing with an integrated flange, two ball-bearing inner rings, seals...

EU-BTI
8302.42.00.90

recessed metal fixtures for furniture, c...

EU-BTI
9033.00.90.00

a metal plate with a characteristic shape, including a libelle and specific drillings, made of aluminum, used to mount light sensors on different loca...

EU-BTI
8306.29.00.00

cylinder-shaped hollow products made of inferior metal with a closed bottom plate, used as decorative containers in the form of a vase or an overpot, ...

EU-BTI
8483.30.80.90

Cylinder-shaped bearing with axial bores made of inferior metal for oil film lubrication of a shaft in the exhaust turbocharger of a passenger car. We...

EU-BTI
8538.10.0000

Overmold Housing Assembly Base

US-Rulings
8207.90.30.00

Biton base made of base metal with a mol...

EU-BTI
8483.10.95.90

a hollow drive shaft made of unalloyed metal, manufactured from seamless steel tube, in the form of a rod-shaped product with a diameter of 60.3 mm, u...

EU-BTI
8306.29.00.00

ornate candle holders made of base metals, approximately 22 cm high, with a circular foot. They have a central round plate to hold a clear, approximat...

EU-BTI
7326.90.98

clamp element made of chrome steel, cons...

EU-BTI
8483.30.38.99

cylindrical box bearing housings with fl...

EU-BTI
8302.42.00

a metal furniture fitting in the form of a knob with a faceted, gilded dome, consisting of brass and steel materials

EU-BTI
8306.29.00.00

pendant made of a base metal

EU-BTI
7307.93

nonalloy steel butt-weld elbow pipe fittings

US-Rulings
7307.92.3010

Type1005 carbon steel fitting used in an automotive brake system

US-Rulings
7326.90

forged and unforged nonalloy steel threaded hydraulic fittings

US-Rulings
8302.30.00

U-shaped car tie-downs made of inferior metal with a U-shaped outline, featuring slightly angled arms used for securing cargo in vehicles' trunks as p...

EU-BTI
9608.99.00

Holzschaft FH/RB, a 7.2 cm long casing w...

EU-BTI
7326.90.98.90

A square mounting plate with four throug...

EU-BTI
3926.30.00.90

a base foot made of molded plastics, app...

EU-BTI
7610.90.90

quadrangular mounting plates, made of aluminum, with oval and circular holes (diameter approximately 14 mm), used in solar panel construction systems,...

EU-BTI
9015.90.00.00

swimmers and counterweights with a plastic cylinder having a specific density less than water and a body made of low-grade metal, used to measure the ...

EU-BTI
8529.90

base metal bracket used to secure a projector lamp in place within the housing of a multimedia projector

US-Rulings
8536.90.95

plastic molding with metallic terminals, part of the electronic control unit of the electronic power steering

EU-BTI
8302.50.00.00

Wall brackets of base metal, especially suitable for hanging plasma or LCD television screens on a wall

EU-BTI
7326.90.98.90

cylindrical products with round base, made of steel, equipped with a continuous circular borehole, used as counterbalance for pendant lights

EU-BTI
7307.92.90.90

a metal elbow fitting with a M42 external thread and a DN 25 flange adapter, made from steel (1.0718 / ST37), featuring a 90° bend

EU-BTI
8301.40.90.00

Cylindrical lock bodies made of base met...

EU-BTI
7412.20.00.00

copper alloy pipe connector, made of a c...

EU-BTI
7318.11.00.00

galvanized steel coach screws with hexagonal head, coarse thread and shank diameter over 5 mm, designed for heavy timber structure fastening

EU-BTI
8536.90.10

so-called crimp contact, essentially consisting of a specifically shaped body made of base metal, designed for a voltage of less than 1000 V, used to ...

EU-BTI
7318.12.90.90

socket head screws made of mild steel wi...

EU-BTI
8302.41.10.00

a set consisting of components for a sli...

EU-BTI
8306.29.00.00

ornamental items consisting of a framewo...

EU-BTI
8306.29.00.00

decorative items made from inexpensive m...

EU-BTI
9027.90.00

A plastic injection molded housing compo...

EU-BTI
7604.29.90.90

Aluminum profile for sill blends, featuring hakenförmige cross-sections, made from aluminum alloy (6063-T5) with a silver or black eloxiert finish, us...

EU-BTI
7307.91.00.90

Steel flange made of unalloyed steel (ma...

EU-BTI
7326.90.98.90

street furniture terminal made of a steel tube body and stainless steel/stainless steel domed head

EU-BTI
8302.30.00.90

fully made of inferior metals, nearly sq...

EU-BTI
8302.50.00.00

baseplate with double hook, made of zamak and stainless steel, suitable for wall mounting

EU-BTI
9026.90.00

head part, upper housing part of an oil level indicator, made of base metal with various holes and threads

EU-BTI
8481.90.00

Leerkupplung in the form of a machined, use-specifically formed attachment element made of unalloyed metal with ventilation hole and mounting surface ...

EU-BTI
8302.50.00

towel holders, consisting of an almost U-shaped bracket with a round cross-section, movably attached to a circular or rectangular holding device for w...

EU-BTI
8302.41.10

fittings and mountings of base metal for...

EU-BTI
7307.93.99.90

reducing eccentric connection made from ...

EU-BTI
8302.10.00.90

massive products made of non-ferrous metal, having a U-shaped appearance in side view and semi-circular recesses on the legs, used as hinges for conne...

EU-BTI
7318.15.68.90

screw, equipped with a cylindrical head with hexagon socket, m4 thread, and black zinc-plated surface coating, intended for fixing various objects

EU-BTI
7326.90.94.90

stainless steel products called 'armatures' made by drop forging, featuring a rod-like body with various connection devices (e.g. clips, caps, forks, ...

EU-BTI
7318.11.00

lag screw of base metal, features includ...

EU-BTI
7616.99.90.99

a small metal component designed for attaching and holding objects in place

EU-BTI
8302.10.00.90

Hinge made of base metal

EU-BTI(+1 similar)
8302.10.00.90

hinge made of base metal

EU-BTI
7616.99.90.99

mounting frame made of aluminum

EU-BTI
8538.90.99.99

a non-assembled housing set consisting of a specifically shaped metal housing with a square flange and dust cap, an adjustable protective cap with a s...

EU-BTI
7308.90.98

steel flat bar U-shaped base with weldin...

EU-BTI
8431.39.00.90

Side plate made from base metal according to technical drawing, used as connecting element for trolley frame and fixed point traverse.

EU-BTI
8538.90.99.99

a plastic frame with a gasket and metal holding clips, for use as the chassis frame of an electrical connector

EU-BTI
7616.99.10.99

End fitting made of aluminum

EU-BTI
8305.90

filing strips

FindHS.Codes
click for details
8302.41.90

two nested, coiled pipes with ball-shaped ends, one of which is bent at a 90° angle and has a bracket for wall mounting, made of inferior metals

EU-BTI
7326.90.98

a set consisting of a steel mounting plate, plastic alignment aid, steel screws, plastic dowels, grub screw, hex key, glue, and assembly instructions ...

EU-BTI
7307.29.10.90

T-pieces with threaded connections made of stainless steel, used for connecting pipes/hoses in water treatment plants

EU-BTI
8708.99.97

steel product, part of transmission housing, for automotive industry, material EN 10149-S355MC

EU-BTI
8306.29.00.00

conically shaped, decorative containers ...

EU-BTI
8473.29.90.00

Metal profile foot for bank payment terminals, used as a support for other payment processing devices, with optional shelves.

EU-BTI
7308.90.6000

ASTM A-36 non-alloy steel beams of various types and sizes

US-Rulings
8201.10.00

1 gardening trowel of base metal

COMMISSION I
3926.90.97.90

socket support for trailers, made of plastic and metal

EU-BTI
8306.29

a decoration object (ornament), of base ...

EU-BTI
7326.90.98

steel bock housing

EU-BTI
8302.50.00

curved links with a rectangular cross-se...

EU-BTI
8487.90.59

Gelenkstellfuß, consisting of a steel ro...

EU-BTI
7616.99.10.99

aluminium articulated arm mounting, used in hospitals for holding touchscreen terminals at patients' bedsides, predominantly made of aluminium

EU-BTI
7415.39.00.00

A nickel-plated brass threaded piece wit...

EU-BTI
7117.19.00.90

small decorative pins made of base metal, featuring various shapes (e.g. round, rhomboid) and diameters (4mm - 11 mm) on top and four sharp 'teeth' on...

EU-BTI
7325.99.90.90

angled threaded plate, manufactured from steel (GS-20 Mn 5) via precision casting, featuring multiple tapped holes for screwing profiles into four-rod...

EU-BTI
7412.20.00.00

bent metal tube made of brass with a 45°...

EU-BTI
7616.99.90.99

heat sink, heat sink mounting frame and ...

EU-BTI
3926.90.97.90

Befestigungsstäbe made of Polypropylen (...

EU-BTI
8302.30.00.90

other metal fasteners for vehicle bodies, consisting of products with a roughly square outline and an L-shaped cross-section, equipped with various sp...

EU-BTI
8302.42.00.90

fully made of non-ferrous metal, cylindr...

EU-BTI
8302.41.90.00

conical products made of non-ferrous met...

EU-BTI
8302.41.90.00

ball-shaped, solid products made of base metal, equipped with a circular hole with inner thread (M6), used as decorative elements and protection in ra...

EU-BTI
8481.90.00

round product made of die-cast zinc, manufactured specifically according to a factory drawing, for installation in a sanitary fitting, used as a cover...

EU-BTI
7306.21.00

Stainless steel tubing for oil or gas well anchoring, made of stainless steel, welded, perforated with steel alloy anchoring rings at both ends

EU-BTI
8301.60.00

specifically shaped, approximately rectangular flat products made of base metal with rounded end faces, featuring a hook on one long side and one fron...

EU-BTI
8301.60.00.90

rectangular flat products made of non-ferrous metal, with rounded head sides, used in electrical rotary lock cylinders for safes

EU-BTI
9032.90.00

flange assembly, consisting of cast aluminum flange with steel bolts, screws, aluminum, rubber cushioning and plastic plug, used to attach Hydraulic E...

EU-BTI
8302.42.00

mounting panel made of steel for 19 inch...

EU-BTI
7324.90.00.90

Toilet roll holders consisting of a near...

EU-BTI
7307.29.10

connection element made of stainless ste...

EU-BTI
8413.91.00.90

A circular product made of inferior metal, specifically designed according to technical drawings, with twelve perforations and eleven drillings, havin...

EU-BTI
8302.30.3060

cast iron components of automotive transmission mounts

US-Rulings
8536.69.30.00

connecting plug with steel plates, plast...

EU-BTI
7318.15.58.90

steel screws with a cross recessed head, used for fixing plastic and metal components

EU-BTI
8538.90.99.99

Housing for signal cables, consisting of a specifically shaped metal body with various recesses for accepting signal cable connectors and plug connect...

EU-BTI
8466.93.60.00

Coolant ring, in the form of a ring-shaped assembly element made of uned metal with a threaded hole on the flange surface for receiving a supply hose ...

EU-BTI
7326.90.98.90

wall-mounted brackets made of fully galvanized steel, consisting of a rectangular base plate stamped out and drilled in each corner, and a U-shaped ha...

EU-BTI
8308.20.00

hollow rivet with aluminum sleeve and ga...

EU-BTI(+1 similar)
7326.90.98.90

a work base made of stainless steel and thermoplastic material (POM), designed to accommodate various hand tools by welding or screwing.

EU-BTI
7503.00.90

recycled alloy in the form of sprues, sprue systems, connectors, etc., in which nickel clearly predominates over the other base metals

EU-BTI
7326.90.98.90

steel products, consisting of a approxim...

EU-BTI
8538.90.99.99

mounting plate made of galvanized steel, manufactured with precise measurements and drillings according to technical drawing (largest dimension 205 x ...

EU-BTI
3926.90.97.90

Kabelbinderhalter (Befestigungssockel) aus formgepresstem Kunststoff, mit zwei Bohrungen und einem eckigen Aufsatz zum Durchstecken von Kabelbindern, ...

EU-BTI
7308.90.98.90

stainless steel railings and covers with flat bases and protruding tubular elements, available in rectangular or circular models, made of stainless st...

EU-BTI
3925.90.10.00.00

DUBEL NAIL

TR-BTI
8431.10.00.00

front casing part, specifically designed...

EU-BTI
7616.99.90

aluminum drum with flange, used as a base plate in air freight containers for temperature-controlled goods, providing support for the floor

EU-BTI
8479.90.20.90

Tool holder for industrial robots, made of cast steel or iron, specifically designed for robot arms, with special grooves and holes

EU-BTI
7326.90.98.90

steel mounting plate with eight holes

EU-BTI
7308.90

fully chromed steel products, consisting...

EU-BTI
9027.90

conventional base for smoke or heat dete...

EU-BTI
8302.50.00.00

shelf consoles made of base metals, cons...

EU-BTI
3923.50.90.00

plastic cap with a metal chain, used to ...

EU-BTI
9305.91.00

a turret system consisting of individual technical elements integrated into a tower-like structure made primarily of inferior metal, serving as the ba...

EU-BTI
7326.90.98.90

square steel pedestals, consisting of fo...

EU-BTI
8538.90.99.99

a custom-made plastic molding with copper/aluminum rivets and screws for mechanical fastening, designed specifically for a connector panel in a car, w...

EU-BTI
8305.90.00.00

paper clips made of base metal, with movable hooks at the end for holding together paper pages

EU-BTI
8302.50.00

metal supports used for the assembly of radiator heating systems, available in two models with varying dimensions and components

EU-BTI
8483.30.80.90

Grey cast iron lager flange (see illustration), cylindrical device with a flat ring segment with metal mounting holes. It is used to guide the overrun...

EU-BTI
8302.50.00.00

U-shaped double hooks made of inferior m...

EU-BTI
7307.19.90.00

Stainless steel flange, made from fine cast (material number 1.4301) with four mounting holes for connecting a tube to a motorcycle engine block

EU-BTI
7318.19.00.90

an anchor bolt base consisting of a stainless steel or galvanized steel bolt without head, with washer, fitted with an expandable ankermof, threaded n...

EU-BTI
8504.90

A specifically shaped part, known as a mounting piece in the form of a corner piece, with a powder-coated outer surface and with a serial number engra...

EU-BTI
9405.99.00

street lamp body made of hollow steel profile with round or octagonal cross-section, featuring a flat base plate for ground attachment, tapered design...

EU-BTI
7318.19.00.90

plate with threaded hole, zinc plated st...

EU-BTI
7616.99.10.99

aluminum fittings, consisting of an aluminum die-cast body with two semi-circular recesses for rods or bars of 1 to 2.5 cm and two aluminum adjustment...

EU-BTI
8538.90.99

a metal holder for plug-in contact insert, consisting of a cylindrical metal part with a base and long retaining parts, designed to hold electrically ...

EU-BTI
8310

base metal sign plates, nameplates, address-plates and similar plates

FindHS.Codes
click for details
8302.50.00

Taschenhaken made from base metal (zinc)...

EU-BTI
8302.50.00

metal brackets equipped with vibration and thickness mounting accessories, designed to freeze hydraulic elements

EU-BTI
8113.00.90.90

drill rod base body made of cermet

EU-BTI
8504.90

metal panels, brackets, covers, base pla...

EU-BTI
8536.90.95

copper lamella with three mounting holes...

EU-BTI
8431.10.00.00

Tragbügel, made from a mass-produced, V-shaped metal component with a through-hole at the protruding end, designed for attachment to the top of a chai...

EU-BTI
7307.91.00.90

a metallic component with a passage for ...

EU-BTI
8302.30.00.90

fully made of non-ferrous metal products with a nearly triangular base area, which is worked out to an intake device with a rounded edge and cylindric...

EU-BTI
7318.19.00.90

anchor bolt of base metal, made of stain...

EU-BTI
7326.90.98

Zinc-plated steel manufacturing (bracket or cantilever support) composed of a steel U-profile and an accessory for fixing supported structures

EU-BTI(+1 similar)
7326.90.98

Zinc-plated steel manufacturing (bracket or cantilever support) composed of a steel U-profile and an accessory for fixing supported structures

EU-BTI
8301.60.00.90

fully made of non-precious metal, semi-circular flat products with a central round hole. They have specific notches and a circular shape on one side f...

EU-BTI
7326.90.94.90

Fully made of steel, forged products with a flat mounting plate at one end and a cup-shaped design at the other. The long, massive middle part widens ...

EU-BTI
8207.50.90

exchangeable drill bit made of low-metal with a diameter of 40 mm, for use in drilling machines to drill holes in wood

EU-BTI
8305.90.00.00

26 mm large office paper clips made of wire from non-ferrous metal, coated with a colored covering, packaged in a plastic box containing 100 pieces

EU-BTI
7326.90.98

L-shaped corner bracket made of stainles...

EU-BTI
7308.90.59

screw-in anchor with a round cross-section, made of sheet steel, hot-dip galvanized, for permanently attaching structure supports to the ground or oth...

EU-BTI
8302.41.6080

Extruded Aluminum Wall Bracket Assembly, with an aluminum alloy series designation of 6061-T6.

US-Rulings
8302.42.00

long, flat products made of non-ferrous metal, available in two versions (so-called mounting angles and so-called rear plates), each with a nearly rec...

EU-BTI
8302.42.00

flat metal products used as mounting brackets for audio reception devices on 19-inch cabinets, consisting of two types: a flat plate with six holes an...

EU-BTI
8301.40.19

electrical locks made of base metals, consisting of a base holder, locking plate, gear, slider, PCB, motor and power cord

EU-BTI
7326.90.98.90

General steel galvanized support for mounting sensors in M18 format, excluding universal U-nut mount, screws and nuts, union nut M6 2Rondelles, and se...

EU-BTI
7412.20.00.00

A brass connector piece with nut and threading, made of copper-zinc alloy (magnetic) with a predominantly copper content, used for connecting hoses or...

EU-BTI
7616.99.10.99

RSB cleat made of aluminum alloy with stainless steel screws for mounting on RSB clips, used for securing coaxial cables

EU-BTI
7307.91.00.90

steel flange, made of unalloyed steel (m...

EU-BTI
7307.91.00.90

Flange made of steel, with 4 fastening holes, one side is worked into a 90°-angled pipe end with outer thread. Used for connecting pipes or pipe lines...

EU-BTI
7318.19.00

mounting brackets made entirely of steel, with a specifically designed sheet metal section and a screw that is screwed into the perforation

EU-BTI
7616.99.10

aluminum casting elements for passenger car armrest structure and frame, complex shape, specially bent and shaped

EU-BTI
7609.00.00.90

flange connection made of aluminum

EU-BTI
8302.41.90.00

wire rings made of a characteristic type of non-ferrous metal, featuring a round cross-section and equipped with plastic hangers with a hook-shaped en...

EU-BTI
3926.90.97

Wandanschlussprofile aus Kunststoffen, bestehend aus speziell geformtem Oberteil und Unterteil für Befestigung an Küchenarbeitsplatten

EU-BTI
8302.42.00.90

leveling feet, consisting of a round, ta...

EU-BTI
8431.10.00.00

Feststellstück, a nearly triangular product made of uned metal with two openings, specifically designed for technical drawing, intended for installati...

EU-BTI
7326.90.98

Zinc-plated steel manufacturing (bracket or cantilever support) composed of a steel 'U' profile and an accessory for fixing supported structures

EU-BTI
8207.13.00.00

fully made of non-ferrous metal product, 'Bohrrohrverschraubung', with an outer diameter of 117 mm, approximately 20 mm high, and equipped with a coni...

EU-BTI
7326.90.98

mounting plate, intended as an aid in placing a recess form when pouring concrete into a mould, made of steel, whether or not galvanized, with 2 pins ...

EU-BTI
8302.50.00

a restraint, of base metal, in the form of fixed universal wall bracket for mounting a flat screen on the wall, made of steel

EU-BTI
8310.00.00.00

rectangular metal badges with logo and b...

EU-BTI
8487.90.90

cylindrical installation element made of...

EU-BTI
8305.90.00.00

paper clips made from low-grade metal, u...

EU-BTI
7326.90.98.90

TV wall mounts made of steel and plastic, consisting of a wall mounting device and a frame for attaching a TV, with articulated arms connecting the tw...

EU-BTI
6603.90.90

Square parasol base type base, composed of two square plates with rounded corners, in steel, allowing for insertion of a parasol pole, also made of st...

EU-BTI
8302.50.00.00

a towel holder made of base metal, consisting of an extendable rod with a circular cross-section and a circular mounting device at one end for wall in...

EU-BTI
7503.00.90.00

Circulating alloy in the form of sprues, sprue systems, connectors, etc, in which nickel clearly predominates over the other base metals

EU-BTI
7326.90.98.90

fully made of steel frame constructions ...

EU-BTI
9503.00.99.90

ca. 70 x 10 mm large products made of in...

EU-BTI
8308.90.00.90

Metal shoe fasteners with a nearly U-shaped frame and a central pin, featuring glass stones, used to attach to shoes

EU-BTI
8708.99.10

coolant hose, also cooling water pipe, as shown in the photo. it is a multi-bent, vehicle-specifically designed tube made of an aluminum alloy, with t...

EU-BTI
7411.21.90

L-shaped, curved pipes with a polished, chrome-plated surface and a threaded hole, made of CuZn40 brass material, used as back support pipes in the ba...

EU-BTI
7308.90.98.90

cast iron couplings for constructions, made of malleable iron, galvanized or black-colored lacquer, T-shape with bend or straight, with stainless stee...

EU-BTI
8431.43.00.00

cylindrical drilling rod made of unalloy...

EU-BTI
8419.90.85.90

large chamber kit consisting of a usage-specifically formed shell (frame) made of plastic, plastic support base and shaft made of inferior metal - see...

EU-BTI
8414.90.00.90

Bolt adapter made of case-hardened steel, part number 911 902 013 2-, in the form of a screw element made of steel manufactured according to workshop ...

EU-BTI
7610.90.90

square mounting plates made of aluminum alloy with predominantly aluminum content, featuring an oval and a circular hole (diameter approximately 13 mm...

EU-BTI
8301.60.00.90

rectangular, nearly rectangular metal products with specific shapes, two circular holes and three 'Rastnasen' on one side, used in non-ferrous metal d...

EU-BTI
3926.90.97

U-shaped plastic clips used for securing...

EU-BTI
7307.93.19.99

laßok base metal connector with internal...

EU-BTI
8308.10

Hooks, eyes and eyelets of base metal

FindHS.Codes
click for details
8708.99.97.90

machined steel casting used as part of a...

EU-BTI
8302.30.3060

base metal mountings, fittings and similar articles suitable for motor vehicles; and parts thereof

US-Rulings
8708.99.93.00

towing eyelet made from hardened steel forged into towing eyelet shape, to include threaded element at base of the shaft to facilitate attaching and d...

EU-BTI
9003.19.00

Einsatz for correction glasses, consisti...

EU-BTI
8302.30.00.90

fully made of unalloyed metal, U-bow-shaped holding clips with hollow cylindrical components at the slightly beveled ends, used for navigation devices...

EU-BTI
8309.90.00.90

g34 candle lid, which measures 4-3/4 inches in diameter and is made of 80 percent iron, 17 percent zinc alloy and 3 percent rayon

US-Rulings
8477.90.80

Column - steel rod with cylindrical basic shape and thread for installation in plastic injection molding

EU-BTI
8538.90.99

housing for electrical connectors, made ...

EU-BTI
7326.90.98.90

metallic supports for fixing radio speak...

EU-BTI
7412.20.00.00

Metal pipe fitting adapter 1/2" NPT male...

EU-BTI
8306.29.00

decorative handicraft garden tool made o...

EU-BTI
7326.90.94

bichromated plated stamped steel clamp, ...

EU-BTI
8413.91.00.90

round plastic plate with a diameter of 120 mm and four evenly arranged circular holes for installation in a wastewater pump

EU-BTI
8481.90.00.90

cylindrical stainless steel housing with central through-hole and four mounting holes for square base, manufactured according to drawing. It is the lo...

EU-BTI
8307

flexible tubing of base metal, with or without fittings

FindHS.Codes
click for details
3926.90.97.90

a mounting set consisting of a plastic m...

EU-BTI
8302.42.00

lengthy, flat products made of base metal with rounded outer ends and circular holes, featuring two opposing hook-like formations at one end for attac...

EU-BTI(+1 similar)
7326.90.98.90

fully made of steel products consisting of a circular base plate with central hole and internal thread, a slightly bent tube with various holes and on...

EU-BTI
8301.60.00.90

fully made of non-ferrous metal, cylindrical products with longitudinal holes, equipped with specific steps and recesses along the entire length, a co...

EU-BTI
7318.19.00.90

plate with threaded hole, used in non-au...

EU-BTI
7326.90.98.90

mounting sheets made of galvanized steel, consisting of a specifically formed U-profile with rounded corners, equipped with four circular holes in the...

EU-BTI
8504.90

Special copper busbars (part numbers 443 30 012 00 and 443 30 013 00), specifically shaped for left- or right-side mounting, custom-made according to ...

EU-BTI
8302.30.00.90

fully made of non-prestigious metal products with a triangular base body, having three spike-like formations on one side and a mounting device with a ...

EU-BTI
8302.20.00.90

specially designed caster with disc-shaped base made of base metal, consisting of polyamide roller with grooved ball bearings and coated base

EU-BTI
7326.90.98.00.19

Metal holder that fixes the wires in the...

TR-BTI
7307.99.10.90

Steel pipe connector piece, intermediate plate. The products are approximately cuboid-shaped items made of steel other than stainless (S355JO / C45). ...

EU-BTI
7616.99.90.99

aluminum part, stamped from an aluminum ...

EU-BTI
7318.15.68.90

steel screw with cylindrical head and hexagon socket, M5 thread, black zinc-plated

EU-BTI
8487.90.59

Robot Riser M900, specifically designed from a base plate, cylindrical column, mounting plate and stiffening brackets at the lower end, made of steel,...

EU-BTI
8483.30.32.90

cylinder-shaped storage box, made of metal with a base, featuring a 55 mm diameter and a 40 mm height. It comes equipped with a needle bearing, is mou...

EU-BTI
8302.10.00.90

oval-shaped products made of non-preciou...

EU-BTI
8531.90.00

Meldersockel, in the form of cylindrical cup-shaped plastic bodies with connection clips and recesses for cable introductions, partially connected wit...

EU-BTI
8306.29.00.00

Decorative candle holders made of base m...

EU-BTI
8302.41.90.00

round hole metal products, approximately 40 mm in diameter, with a circular hole having an M8 internal thread, used as decorative elements and impact ...

EU-BTI
7616.10.00.99

bimetallic washer, perforated, for photovoltaic applications, made of 80% aluminum and 20% co-laminated copper, to prevent galvanic corrosion

EU-BTI
7616.99.90

aluminum products shaped according to th...

EU-BTI
6603.90.90

flat steel base, parasol base type, composed of two square plates with rounded corners and a steel tube for parasol insertion

EU-BTI
8481.90.00.90

specifically designed cup lid product made from non-precious metal, with a square base area of approximately 40 x 40 mm and a length of approximately ...

EU-BTI
8302.41.60

MaxBullet mounting hardware is an aluminum extruded rail with bullet–shaped hooks attached every 2 inches along its length and mounting holes spaced e...

US-Rulings
8302.30.00

long cylindrical products made of non-precious metal with a circular cross-section and flat ends, equipped with round openings, plastic clips, and scr...

EU-BTI
7325.99.90.90

steel clamping shells, consisting of two shell-shaped products made of stainless steel with ribs and a central stud and lug, produced by casting

EU-BTI
3926.90.97.90

Fastening clips, also called Express-Cli...

EU-BTI
7318.19.00.90

Steel fixing element composed of a cage with an M6 threaded orifice and a stainless steel screw on which a cable clamp is crimped

EU-BTI
7326.90.98.90

multi-part steel products consisting of ...

EU-BTI
7326.90.98.90

round steel products consisting of a circular base foot with a central vertical rod, equipped with a circular end piece screwed in, and the rod is fit...

EU-BTI
8305.90.00

spring-loaded paper clips made of inferi...

EU-BTI

Sample Image Based Searches:

Need an EXPERT assistance?

Universal 6-digit HS Code

8302.49

See also

All the results generated by the FindHS AI for the "other base metal similar mountings fittings etc"
Group By Sub-heading

Need an EXPERT assistance?

FIND THE CORRECT HS CODES
easily, anywhere

Sample Image Based Searches:

Need an EXPERT assistance?

Universal 6-digit HS Code

8302.49

See also

All the results generated by the FindHS AI for the "other base metal similar mountings fittings etc" Group By Sub-heading

We invite you to follow us on our social media channels for the latest FindHS.Codes news and updates

Need an EXPERT assistance?

FIND THE CORRECT HS CODES easily, anywhere

All the results generated by the FindHS AI for the "other base metal similar mountings fittings etc"
Group By Sub-heading

FIND THE CORRECT HS CODES
easily, anywhere